Product Name Cleanup — Phase 4

<p>Lee Pro Shell Plate #3 for quick caliber change for the Pro 1000 Press. For the 45 Win 45 Win Mag and similar cases.</p><ul> <li><strong>If you order shell plates to convert to another caliber with a different primer size. You will need to order the <strong>Pro 1000 Primer Attachment</strong><br> </strong></li></ul>

<p>Part TR1830 - 1 required for Lee Precision products (D)</p>

<p><strong>Lee Precision PaceSetter 3-Die 7.62x39mm Russian Set</strong> includes the exclusive <strong>Lee Factory Crimp die.</strong> It crimps the bullet in place more firmly than any other tool which prevent buckling of the case and makes for more accurate shooting. The die set also includes a <strong>Bullet Seating Die</strong> that works with almost any point style bullet. A simple finger adjustment is all that is needed to adjust the seating depth.</p><p>If you are reloading for more than one firearm or reloading cases that were fired in other firearms the <strong>Full Length Sizer Die</strong> is a must. These dies are your best buy. They also include a shell holder, powder dipper, load data and are packed in a durable storage box. </p><div style=&quot;clear: both;&quot;> </div><h2><span style=&quot;background-color:Yellow;&quot;><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>INCLUDES:</span><img alt=&quot;Lee precision factory crimp die cutaway&quot; src=&quot;/image/catalog/userfiles/sizingdie.jpg&quot; style=&quot;width: 89px; height: 275px; float: right; margin-left: 100px; margin-right: 100px;&quot;></span></h2><ul><li><strong>Full Length Sizer Die (image shown at right)</strong></li><li><strong>Bullet Seating Die</strong></li><li><strong>Factory Crimp Die</strong></li><li><strong>Built In Stuck Case Remover</strong></li><li><strong>EZ X Expander</strong></li><li><strong>Shell Holder</strong></li><li><strong>Powder Dipper</strong></li><li><strong>Load Data</strong></li><li><strong>Instructions</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>Notes:</strong></span></h2><ul><li><strong>For further Load Data try <strong><a href=&quot;http://www.hodgdon.com/&quot; target=&quot;_blank&quot;>HODGDON Powder Co.</a></strong></li></ul><h2><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul><li><strong>Always wear <a href=&quot;/caldwell-pro-range-glasses-with-yellow-lens-621193086.html&quot;>safety glasses</a> when reloading and shooting.</strong></li><li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li><li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li><li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li><li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul><p> </p>

Part SB1995 - 1 required for Lee Precision products

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;&lt;b&gt;FEATURES:&lt;/b&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Fits Lee Precision Full-length Size Die 7.62x39mm.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Expands case mouth to aid bullet seating.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Made from steel.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p><h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;><b style=&quot;background-color: rgb(255, 255, 0);&quot;>FEATURES:</strong></h2><ul><li><strong>Fits Lee Precision Full-length Size Die 7.62x39mm.</strong></li><li><strong>Expands case mouth to aid bullet seating.</strong></li><li><strong>Made from steel.</strong></li></ul>

&lt;p&gt;Lee Precision Aluminum 4-hole Turret for quick caliber change for the 4-Hole Turret Press and Classic Turret Press. This 4 hole turret will not fit the Lee Pro 1000 or 3 Hole Turret Press.&lt;/p&gt;&lt;h2&gt;&lt;b&gt;FEATURES:&lt;/b&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Fits Lee Precision 4-Hole Turret Press and Lee Classic Turret Press&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Holds up to 4 standard 7/8 x 14 threaded dies.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

<p>Lee #3L Quick change shell plate for the Load-Master Press. For the 30/30, 7/30 Waters and similar cases</p><p><br></p><h2 style=&quot;line-height: 20.8px; color: rgb(68, 68, 68); margin-top: 20px; margin-bottom: 10px; font-size: 27px;&quot;><span style=&quot;font-weight: bold; padding: 3px 7px; text-transform: uppercase; background-color: rgb(255, 255, 0);&quot;>FITS:</span>&amp;nbsp;</h2><p style=&quot;margin-bottom: 10px; line-height: 20.8px;&quot;><br style=&quot;color: rgb(102, 102, 102); font-size: 14px;&quot;></p><ul><li><strong>22 Savage</strong></li><li><strong>219 Zipper</strong></li><li><strong>25-35</strong></li><li><strong>256 Winchester Magnum</strong></li><li><strong>30 Herrett</strong></li><li><strong>30-30 Winchester</strong></li><li><strong>32 Winchester Special</strong></li><li><strong>32 WSL</strong></li><li><strong>32-40 WCF</strong></li><li><strong>375 Winchester</strong></li><li><strong>38- 55 WCF</strong></li><li><strong>408 Winchester</strong></li><li><strong>6.5x55mm Swedish Mauser</strong></li><li><strong>7-30-waters</strong></li><li><strong>7.5mm Schmidt-Rubin</strong></li><li><strong>7.62x53mm Argentine Mauser</strong></li></ul>

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p>

<p>When delivered from the factory, the collet die will grip the bullet with a light press fit with cases of average hardness. Should you desire a tighter fit, you can order this .002 undersize mandrel for 7mm Remington Mag, 7x57, 7mm/08, and 7mm Express.</p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;&lt;h2&gt;&lt;b style=&quot;background-color: rgb(255, 255, 0);&quot;&gt;FEATURES:&lt;/b&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Fits Lee Precision Full-length Size Die .30-30 Winchester.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Expands case mouth to aid bullet seating.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Made from steel.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .452 diameter 160 grain flat nose bullets suitable for .<strong>45 ACP (Automatic Colt Pistol), .45 Colt (Long Colt), .45 Auto Rim.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.</p><p><strong>Handles and sprue plate are included.</strong> The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.<strong>rs in the area to lead which is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing Exposure supplied with product.</strong><br></p><p><iframe width="400" height="225" frameborder="0" src="https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0" allowfullscreen=""></iframe></p><p><br></p><div style="clear: both;"> </div><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Hardwood handles</strong></li> <li><strong>Hard anodized sprue plate</strong></li> <li><strong>Two Aluminum mold block halves</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">FEATURES:</span></span></h2><ul> <li><strong>Produces a bullet that fits 45 ACP, 45 Colt, .45 Auto Rim</strong></li> <li><strong>Bullet diameter: .452 inches</strong></li> <li><strong>Bullet weight: 160 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: N/A</strong></li> <li><strong>Distance from nose to first lube groove: N/A</strong></li> <li><strong>Bullet shape: Round nose</strong></li> <li><strong>Ballistic Coefficient: N/A</strong></li> <li><strong>2 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are CNC machined from aluminum for exacting precision</strong>.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged &amp; bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href="/lee-precision-magnum-melter.html"> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple &amp; your best bullets are poured with the<strong> <a href="/lee-precision-lead-ladle.html">Lee Ladle</a>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a target="_blank" href="http://www.hodgdon.com/">HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 &amp; 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable &amp; harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" alt=""><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses</a></strong> when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li> <li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li> <li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul><h2> </h2><h2> </h2>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<h2 style="font-family: &quot;Open Sans&quot;, sans-serif; color: rgb(0, 0, 0);">Six Cavity Commercial Quality Molds</h2><p>Made for heavy duty volume production, this <strong>Lee Precision Six Cavity Bullet Mold</strong> produces .430 diameter, 240 grain Semi Wad Cutter nose bullets suitable for<strong> .44 Special, 44/40</strong> <strong>WCF (Winchester Center Fire), .44 Remington Magnum</strong> and similar cartridges. This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, this Lee mold is easier to use, causes less operator fatigue during casting and can produce more consistent bullets than other molds made from iron or steel. Lee's 6 cavity mold blocks are machined from aluminum and assembled with steel bushings and alignment pins for lasting precision.</p><p>A sprue plate is included but <strong><a href="https:///lee-precision-commercial-mold-handles.html">Handles</a></strong> are sold separately. The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><p><iframe width="400" height="225" frameborder="0" src="https://www.youtube-nocookie.com/embed/L8xKC7gbGTI?rel=0" allowfullscreen=""></iframe></p><h2><br></h2><div style="clear: both;"> </div><h2 style="clear: both;"><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Includes:</span></h2><ul> <li style="clear: both;"><strong>(2) aluminum Mold Block halves (mold handles NOT included)</strong></li> <li style="clear: both;"><strong>Hard anodized Sprue Plate with handle</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">FEATURES:</span></span></h2><ul> <li><strong>Produces bullets that fit .44 Special, .44-40 WCF, .44 Remington Magnum and similar sized cartridges.</strong></li> <li><strong>Bullet diameter: .430 inches</strong></li> <li><strong>Bullet weight: 240 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: N/A</strong></li> <li><strong>Distance from nose to first lube groove: N/A</strong></li> <li><strong>Bullet shape: Semi Wad Cutter nose </strong></li> <li><strong>Ballistic Coefficient: N/A</strong></li> <li><strong>6 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are machined from aluminum</strong>.</strong></li> <li><strong>Assembled with steel bushings and alignment pins for lasting precision.</strong></li> <li><strong>Cam operated sprue plate to eliminate the pounding common to ordinary molds.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged &amp; bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href="/lee-precision-magnum-melter.html"> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple &amp; your best bullets are poured with the <strong><a href="/lee-precision-lead-ladle.html">Lee Ladle</a>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a target="_blank" href="http://www.hodgdon.com/">HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 &amp; 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable &amp; harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" alt=""><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses</a></strong> when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permit

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>The <strong>Lee Precision .22-250 Remington Ackley Improved 40-Degree Shoulder PaceSetter 2-Die Set.</strong> Very Limited Production. Bullet Diameter .223&quot;, 5.66mm. Maximum Overall Length 2.350&quot;, 59.69mm.&amp;nbsp; Includes a&amp;nbsp;<strong>Full Length Sizer</strong>&amp;nbsp;that allows you to restore any case to factory original dimensions. So you can fire form in your gun. Also includes a&amp;nbsp;<strong>Bullet Seating Die</strong>, that works with nearly any point style bullet and has a simple finger adjustable seating depth. Tapered on end for use with automatic bullet feeders. The included&amp;nbsp;<strong>Factory Crimp Die</strong>&amp;nbsp;is the only effective way to crimp bottle neck rifle cartridges. Applying a factory crimp will always improve the utility of the cartidge and improve the accuracy.<br></p><p><span style=&quot;line-height: 1.6em;&quot;> </span><span style=&quot;line-height: 1.6em;&quot;>Lee Precision guarantees no other brand of full length sizing dies will load ammunition with less bullet runout than Lee Rifle Dies.</span></p><div style=&quot;clear: both;&quot;> </div><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>INCLUDES:</span></h2><ul><li><strong>Full Length Sizing Die (lube required)</strong></li><li><strong>Bullet Seating Die</strong></li><li><strong>Factory Crimp Die</strong></li><li><strong>Universal Shell Holder</strong></li><li><strong>Powder Dipper</strong></li><li><strong>Instructions/Load Data</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>Notes:</strong></span></h2><ul><li><strong>Speer advises that Speer bullets should not be used with certain Lee Dies. All other brands work great!</strong></li><li><strong>If for any reason you do not use the<a href=&quot;/lee-precision-resizing-lubricant.html&quot;> Lee Resizing Lubricant,</a> be very careful not to contaminate the powder or primers. Other brands are oil base and have serious, detrimental effects on powder &amp;amp; primers. Because of the stickiness, they also attract grit that can damage the die.</strong></li></ul><h2><span style=&quot;background-color:#FFB84D;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>Caution:</strong></span></h2><ul><li><strong>If your using a Steel Sizer, be sure to lubricate your cases. Without lubrication, your die will be damaged and the case may become stuck in the die</strong></li><li><strong>Seating bullets excessively deep will reduce the case capacity and increase the pressure. It is Extremely Important that full wadcutter bullets be used with light loads ONLY. You can select these by their reduced velocity.</strong></li></ul><h2><strong style=&quot;line-height: 1.2em;&quot;><em style=&quot;line-height: 1.2em;&quot;>IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul><li><strong>DO NOT USE more powder than recommended</strong></li><li><strong>DO NOT USE a heavier bullet than recommended</strong></li><li><strong>DO NOT SEAT the bullet deeper than normal</strong></li><li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li><li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li><li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul><li><strong>Always wear <a href=&quot;/caldwell-pro-range-glasses-with-yellow-lens-621193086.html&quot;>safety glasses</a> when reloading and shooting.</strong></li><li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li><li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li><li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li><li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

Part SB2253 - 1 required for Lee Precision products

&lt;p&gt;&lt;strong&gt;Lee Precision EZ X Decapping Pin &lt;/strong&gt;for .223 Remington, .222 Remington, .22-250 Remington. (Part #SE2172)&lt;/p&gt;&lt;!-- AKA_MPN --&gt;&lt;p&gt;This product is also known as &lt;a href=&quot;/lee-precision-ez-x-expander-223-remington.html&quot;&gt;90022&lt;/a&gt;&lt;/p&gt;&lt;p&gt;&lt;br /&gt; &lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>The Lee Precision .250-3000 Savage Factory Crimp Die with standard 7/8" by 14 trheads is packaged in a custom fit plastic storage case with complete instructions.</p><p><strong><a href="/lee-precision-resizing-lubricant.html">Lubrication</a></strong> is required.</p><p><strong>Lee Precision Factory Crimp Dies</strong> are the only effective way to crimp Bottle Neck Rifle Cartridges<strong>.</strong> This important step should be performed on all loads used for hunting. It crimps the bullet in place more firmly than any other tool. It is impossible to buckle the case, as with regular roll crimp dies. Trim length is not critical. Tests demonstrate that bullets which have no cannelure will shoot more accurately if crimped in place with the Lee Factory Crimp Die.</p><p>Factory ammo is often more accurate and able to withstand rough handling because the bullet is firmly crimped in place. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. Even powder selection is less critical. </p><p><img alt="" src="/image/catalog/userfiles/riflefactorycrimp.jpg" style="float:right; height:323px; margin-left:10px; margin-right:10px; width:.243 Winchesterpx" /></p><h2><strong>Includes:</strong></h2><ul><li><strong>Instructions</strong></li><li><strong>Custom fit plastic storage case</strong></li><li><strong>Hardened Steel Factory Crimp Die</strong></li></ul><h2><strong><strong>Features:</strong></strong></h2><ul><li><strong>Crimps bullets in place more firmly with more uniform pressure than any other die.</strong></li><li><strong>A Simple adjusting screw makes setting the amount of crimp desired easy.</strong></li><li><strong>Produces more consistent and dependable ammo.</strong></li><li><strong>Eliminates magnum powder ignition problems.</strong></li></ul><h2><strong>Notes:</strong></h2><ul><li><strong>Lubrication required, FS Reloading recommends <strong><a href="/lee-precision-resizing-lubricant.html">Lee's Resizing Lube</a></strong></li><li><strong>Factory Crimp Die is included with the Lee Pacesetter 3-Die sets</strong></li><li><strong>Fits presses with standard 7/8"-14 threads</strong></li><li><strong><a href="/press-shell-holders">Shell holder sold separately</a></strong></li><li><strong>Trim length is not critical</strong></li></ul>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This &lt;strong&gt;Lee Precision Case Length Gauge&lt;/strong&gt; is the easiest way to trim &lt;strong&gt;7.62x39mm Russian&lt;/strong&gt; cases to the proper length while squaring case mouths at the same time. The hardened steel Case Length Gauge is precisely sized to produce cases perfectly trimmed to the SAAMI (Sporting Arms and Ammunition Manufacturers' Institute) standard length. The specially designed shell holder helps keep everything square.&lt;/p&gt;&lt;p&gt;The Lee Case Length Gauge and Shell holder works in conjunction with &lt;strong&gt;LEE's Cutter and Lock Stud&lt;/strong&gt; (as shown in the image below) and with the &lt;strong&gt;LEE Cutter with Ball Grip&lt;/strong&gt; and /or &lt;strong&gt;LEE Zip Trim&lt;/strong&gt; to produce consistently trimmed and squared cases with no guesswork and no measuring required.&lt;/p&gt;&lt;p&gt;If you're looking for a simple, no hassle way to quickly trim and square your cases to SAAMI standards, this is the tool for you.&lt;/p&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);=&quot;&quot; clear:=&quot;&quot; both;&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;INCLUDES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li style=&quot;clear: both;&quot;&gt;&lt;strong&gt;Caliber Specific Case Length Gauge&lt;/strong&gt;&lt;/li&gt;&lt;li style=&quot;clear: both;&quot;&gt;&lt;strong&gt;Shell holder&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;img alt=&quot;Lee Precision Case Lenght Gage and Shellholder in use with Lee Precision Cutter and Lock stud&quot; src=&quot;https://fsreloading.com/image/catalog/userfiles/ForSafetySakeTrimCases400.jpg&quot; style=&quot;width: 400px; height: 174px; float: right; margin-left: 10px; margin-right: 10px;&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;FEATURES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Made from hardened steel to retain accuracy.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Trims cases square every time when used with the&amp;nbsp;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-and-lock-stud.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter and Lock Stud&lt;/a&gt;.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;NOTES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Requires the&lt;strong&gt;&amp;nbsp;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-and-lock-stud.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter and Lock Stud&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;which is sold separately.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;FS Reloading recommends The&amp;nbsp;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-with-ball-grip.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter with Ball Grip&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;makes holding the cutter easier, the&amp;nbsp;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/lee-precision-zip-trim.html&quot; target=&quot;_self&quot;&gt;Lee Precision Zip Trim&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;can be added to reduce trimming time, and the&lt;a href=&quot;https://fsreloading.com/lee-precision-3-jaw-spinner-stud.html&quot; target=&quot;_self&quot;&gt;&amp;nbsp;&lt;strong&gt;Lee Precision 3 Jaw Spinner Stud&lt;/strong&gt;&lt;/a&gt;&amp;nbsp;adapts the Lee Case Length Gauge and Shell holder to any electric drill for high speed trimming.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt; &lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p>

&lt;p&gt;&lt;strong&gt;Lee Precision Basic Pro 1000 Press&lt;/strong&gt; ONLY, includes a 3-hole turret and uses standard 7/8x14 thread dies.&lt;/p&gt;

<p>The <strong>Lee Precision .356 Classic Bullet Sizing Kit </strong>is the fastest and easiest way to lubricate and size cast bullets. The Sizing Die has Standard 7/8x14 threads which are compatible with most brands of Single Stage Presses. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are dropped into a container.</p><p>The Lee Precision Lube &amp;amp; Sizing kit is Intended for use on Single Stage Presses ONLY. Lee recommends bullets be relubed after sizing to be sure the sized portion is coated with Alox. All lead bullets MUST be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. </p><div style=&quot;clear: both;&quot;> </div><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Includes:</span></h2><ul><li><strong>Steel sizing Die</strong></li><li><strong>Sizer Punch</strong></li><li><strong>Sturdy plastic container</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>features:</strong></span></h2><ul><li><strong>Standard 7/8 x 14 threads are compatible with most brands of Single Stage Presses.</strong></li><li><strong>Bullets are pushed through the sizing die nose first, no special nose punches are needed.</strong></li><li><strong>Gas checks are automatically seated and crimped in place.</strong></li><li><strong>Sized bullets are captured in the special container.</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>NOTES:</strong></span></h2><ul><li><strong>The Lee Precision Lube &amp;amp; Sizing kit is Intended for use on Single Stage Presses ONLY.</strong></li><li><strong>The push through Punch is used in place of a Shell Holder in the Ram. </strong></li><li><strong>Lee recommends bullets be relubed after sizing to be sure the sized portion is coated with <a href=&quot;http:///lee-precision-liquid-alox.html&quot;>Alox.</a> All lead bullets MUST be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.</strong></li></ul><h2><strong><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Lubricating bullets:</span></strong></h2><ul><li><strong>Place bullets in provided red plastic container and drop in <a href=&quot;/lee-precision-liquid-alox.html&quot;>Lee Liquid Alox</a> onto the bullets. Gently shake the bullets in an orbital motion to coat the bullets. If they do not coat completely, add a little more lube. Spread the bullets onto waxed paper and let dry overnight. Load at least one bullet into a case and check to be sure it easily chambers in the gun. If it fits tightly, you must resize the bullet before loading.</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>sizing bullets:</strong></span></h2><ul><li><strong><p>Screw the sizing die into any standard reloading press. Exact depth is not important. Install the bullet punch into the ram. This fits all rams that use standard shellholders. Place the red plastic container with the lubed bullets inside, on top of the sizing die. Place bullet on the punch and push the bullet through the die. When 3/4 of the bullets have been loaded, lift the red plastic container off the die. Invert the holder before opening. For rifle and hot pistol loads, it is best to relube the bullets to ensure the sized portion is recoated.</p></strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Note:</span></h2><ul><li><strong><a href=&quot;/lee-precision-liquid-alox.html&quot;>Lee Liquid Alox</a> lube is not included and must be ordered separately.</strong></li></ul><h2> </h2>

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;Replacement die body for the Lee Precision Bullet Sizer .356.&lt;/p&gt;&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

The Lee Precision Safety Prime is a new priming system for large and small primers that &lt;strong&gt;eliminates the need to touch the primers&lt;/strong&gt; from the box to the shell. The Safety Prime can be used with 2006 and newer &lt;strong&gt;Turret Presses&lt;/strong&gt;, &lt;strong&gt;Lee Precision Breech Lock Classic Cast&lt;/strong&gt;, and the &lt;strong&gt;Lee Precision Classic Cast Press&lt;/strong&gt;.&lt;!----&gt;.

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;&lt;p&gt;This item has been discontinued by Lee Precision. It is sold as is without warranty. Avaiability is limited to the quantity on hand.&lt;/p&gt;

These instructions are for the Lee Precision Safety Primer Feed made prior to 2012 which was equiped with a round primer tray. This instruction sheet has been discontinued by Lee Precision. Availability is limited to quantity in stock.