Product Name Cleanup — Phase 4

<p><strong>Lee Precision PaceSetter 3-Die 7x57mm Mauser Set</strong> includes the exclusive <strong>Lee Factory Crimp die.</strong> It crimps the bullet in place more firmly than any other tool which prevent buckling of the case and makes for more accurate shooting. The die set also includes a <strong>Bullet Seating Die</strong> that works with almost any point style bullet. A simple finger adjustment is all that is needed to adjust the seating depth. If you are reloading for more than one firearm or reloading cases that were fired in other firearms the <strong>Full Length Sizer Die</strong> is a must. These dies are your best buy. They also include a shell holder, powder dipper, load data and are packed in a durable storage box. </p><h2><span style="background-color:Yellow"><strong>INCLUDES:</strong><img alt="Lee precision factory crimp die cutaway" src="/image/catalog/userfiles/sizingdie.jpg" style="float:right; height:275px; margin-left:100px; margin-right:100px; width:89px"></span></h2><ul><li><strong>Full Length Sizer Die (image shown at right)</strong></li><li><strong>Bullet Seating Die</strong></li><li><strong>Factory Crimp Die</strong></li><li><strong>Built In Stuck Case Remover</strong></li><li><strong>EZ X Expander</strong></li><li><strong>Shell Holder</strong></li><li><strong>Powder Dipper</strong></li><li><strong>Load Data</strong></li><li><strong>Instructions</strong></li></ul><h2><strong><strong>Notes:</strong></strong></h2><ul><li><strong>For further Load Data try <strong><a href="http://www.hodgdon.com/" target="_blank">HODGDON Powder Co.</a></strong></strong></li></ul><h2><strong><strong>WARNING:</strong></strong></h2><p><strong><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></strong></p><ul><li><strong><strong>Always wear <a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses</a> when reloading and shooting.</strong></strong></li><li><strong><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></strong></li><li><strong><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></strong></li><li><strong><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></strong></li><li><strong><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></strong></li></ul><p><strong> </strong></p>

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p>

<p>This part has been discontinued by Lee Precision. Availability is limited to the quantity currently in stock.</p><p> You can "Finger Tighten" the<strong> Lee Precision Lock Rings</strong> and they won't move. Locks to the Die and Press. To loosen your dies, always loosen by the Lock Ring. This insures the lock will maintain its exact setting for future use. Popular with people who want to update other brands. Fits all 7/8-14 die sets. Includes a single lock ring without Rubber O-Ring.</p>

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p>

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;&lt;h2&gt;&lt;b style=&quot;background-color: rgb(255, 255, 0);&quot;&gt;FEATURES:&lt;/b&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Fits Lee Precision Full-length Size Die 7mm-08 Remington.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Expands case mouth to aid bullet seating.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Made from steel.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

Part SB2328 - 1 required for Lee Precision products

<p>The <strong>Lee Precision R2 Universal Shell Holder</strong> fits <strong>.44 Auto Mag., .45 Auto, .22 BR Remington, .224 Clark (.22-257), .22-250 Remington, .240 Weatherby, .243 Winchester, 6mm Remington, .244 Remington, 6mm International, 6mm-250 Savage, 6mm-284, 6mm-06, .25-284, .25-06 Remington, .250 Savage, .257 Roberts, 6.5x52mm Mannlicher-Carcano, 6.5x52mm Parravicini-Carcano, 6.5x52mm Carcano, .270 Winchester, .280 Remington, 7mm-08 Remington, 7mm BR Remington, 7x57mm Mauser, .284 Winchester, .308 Winchester, 7.62x51mm NATO</strong> and <strong>.30-06 Springfield cases</strong>. It is made from hardened steel which has been machined to close tolerance for maximum accuracy. It works with most brands of Single Stage Presses and 3 or 4 hole Turret Reloading Presses. Not for use with Lee's Auto Prime or Lee's hand priming tools.</p><!-- AKA_MPN --><p>This product is also known as <a href=&quot;/lee-precision-shell-holder-r2.html&quot;>90519</a></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><span style=&quot;line-height: 1.2em;&quot;>FEATURES:</span></span></h2><ul> <li><strong>Made from hardened steel</strong>.</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>FITS:</strong></span></h2><ul> <li><strong>.44 Auto Magnum</strong></li> <li><strong>.45 Auto</strong></li> <li><strong>.22 BR Remington</strong></li> <li><strong>.224 Clark (.22-257)</strong></li> <li><strong>.22-250 Remington</strong></li> <li><strong>.240 Weatherby</strong></li> <li><strong>.243 Winchester</strong></li> <li><strong>6mm Remington</strong></li> <li><strong>.244 Remington</strong></li> <li><strong>6mm International</strong></li> <li><strong>6mm-250 Savage</strong></li> <li><strong>6mm-284</strong></li> <li><strong>6mm-06</strong></li> <li><strong>.25-284</strong></li> <li><strong>.25-06 Remington</strong></li> <li><strong>.250 Savage</strong></li> <li><strong>.257 Roberts</strong></li> <li><strong>6.5x52mm Mannlicher-Carcano</strong></li> <li><strong>6.5x52mm Parravicini-Carcano</strong></li> <li><strong>6.5x52mm Carcano</strong></li> <li><strong>.270 Winchester</strong></li> <li><strong>.280 Remington</strong></li> <li><strong>7mm-08 Remington</strong></li> <li><strong>7mm BR Remington</strong></li> <li><strong>7x57mm Mauser</strong></li> <li><strong>.284 Winchester</strong></li> <li><strong>.308 Winchester </strong></li> <li><strong>7.62x51mm NATO</strong></li> <li><strong>.30-06 Springfield </strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>NOTES: </span></h2><ul> <li><strong>Not for use with Lee Precision Auto Prime XR or Lee Ergo Prime.</strong></li></ul><p> </p><!-- AKA_MPN --><p>This product is also known as 90519</p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;The &lt;strong&gt;Lee Precision Safety Scale&lt;/strong&gt; is reliable, very accurate and simple to use. The poise notches are over 1/4&quot; apart to insure fast, accurate setting with no chance of mis-notching. An actual razor edge forms the pivot for the greatest sensitivity. The Lee Safety Scale's beam is made from a tough Phenolic, that can't be bent. If dropped you can feel confident that, if it did not break the scale is still accurate. The Lee scale is magnetically damped with approach to weight. It is sensitive and readable to 1/20 grain.&lt;/p&gt;&lt;h2&gt;&lt;b style=&quot;background-color: rgb(255, 255, 0);&quot;&gt;FEATURES:&lt;/b&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;b style=&quot;&quot;&gt;&lt;strong style=&quot;&quot;&gt;Razor edge pivot&lt;br&gt;&lt;/strong&gt;&lt;/b&gt;&lt;/li&gt;&lt;li&gt;&lt;b style=&quot;&quot;&gt;&lt;strong&gt;110 grain capacity&lt;/strong&gt;&lt;/b&gt;&lt;/li&gt;&lt;li&gt;&lt;b style=&quot;&quot;&gt;&lt;strong&gt;Non-bendable phenolic beam&lt;br&gt;&lt;/strong&gt;&lt;/b&gt;&lt;/li&gt;&lt;li&gt;&lt;b style=&quot;&quot;&gt;&lt;strong style=&quot;&quot;&gt;Magnetically damped, approach to weight&lt;/strong&gt;&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>The <strong>Lee Precision 6.5 Grendel Very LTD Production 3-Die Set.</strong> Very Limited Production. Includes a <strong>Full Length Sizer</strong> that allows you to restore any case to factory original dimensions. So you can fire form in your gun. Also includes a <strong>Bullet Seating Die</strong>, that works with nearly any point style bullet and has a simple finger adjustable seating depth. Tapered on end for use with automatic bullet feeders. The included <strong>Factory Crimp Die</strong> is the only effective way to crimp bottle neck rifle cartridges. Applying a factory crimp will always improve the utility of the cartridge and improve the accuracy.<br></p><p> Lee Precision guarantees no other brand of full length sizing dies will load ammunition with less bullet runout than Lee Rifle Dies.</p><div style=&quot;clear: both;&quot;> </div><h2><strong>Includes:</strong></h2><ul><li><strong>Full Length Sizing Die (lube required)</strong></li><li><strong>Bullet Seating Die</strong></li><li><strong>Factory Crimp Die</strong></li><li><strong>Universal Shell Holder</strong></li><li><strong>Powder Dipper</strong></li><li><strong>Durable Storage Case</strong></li><li><strong>Instructions</strong></li></ul><h2> </h2>

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p>

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p><h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;><b style=&quot;background-color: rgb(255, 255, 0);&quot;>FEATURES:</strong></h2><ul><li><strong>Fits Lee Precision Full-length Size Die 6.5mm Grendel.</strong></li><li><strong>Expands case mouth to aid bullet seating.</strong></li><li><strong>Made from steel.</strong></li></ul>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

Part SD2208 - 1 required for Lee Precision products

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

&lt;p&gt;This &lt;strong&gt;Lee Precision Case Length Gauge&lt;/strong&gt; is the easiest way to trim &lt;strong&gt;.243 Winchester &lt;/strong&gt;cases to the proper length while squaring case mouths at the same time. The hardened steel Case Length Gauge is precisely sized to produce cases perfectly trimmed to the SAAMI (Sporting Arms and Ammunition Manufacturers' Institute) standard length. The specially designed shell holder helps keep everything square.&lt;/p&gt;&lt;p&gt;The Lee Case Length Gauge and Shell holder works in conjunction with &lt;strong&gt;LEE's Cutter and Lock Stud&lt;/strong&gt; (as shown in the image below) and with the &lt;strong&gt;LEE Cutter with Ball Grip&lt;/strong&gt; and /or &lt;strong&gt;LEE Zip Trim&lt;/strong&gt; to produce consistently trimmed and squared cases with no guesswork and no measuring required.&lt;/p&gt;&lt;p&gt;If you're looking for a simple, no hassle way to quickly trim and square your cases to SAAMI standards, this is the tool for you.&lt;/p&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);=&quot;&quot; clear:=&quot;&quot; both;&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;INCLUDES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li style=&quot;clear: both;&quot;&gt;&lt;strong&gt;Caliber Specific Case Length Gauge&lt;/strong&gt;&lt;/li&gt;&lt;li style=&quot;clear: both;&quot;&gt;&lt;strong&gt;Shell holder&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;img alt=&quot;Lee Precision Case Lenght Gage and Shellholder in use with Lee Precision Cutter and Lock stud&quot; src=&quot;https://fsreloading.com/image/catalog/userfiles/ForSafetySakeTrimCases400.jpg&quot; style=&quot;width: 400px; height: 174px; float: right; margin-left: 10px; margin-right: 10px;&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;FEATURES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Made from hardened steel to retain accuracy.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Trims cases square every time when used with the&amp;nbsp;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-and-lock-stud.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter and Lock Stud&lt;/a&gt;.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;NOTES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Requires the&lt;strong&gt;&amp;nbsp;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-and-lock-stud.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter and Lock Stud&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;which is sold separately.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;FS Reloading recommends The&amp;nbsp;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-with-ball-grip.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter with Ball Grip&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;makes holding the cutter easier, the&amp;nbsp;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/lee-precision-zip-trim.html&quot; target=&quot;_self&quot;&gt;Lee Precision Zip Trim&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;can be added to reduce trimming time, and the&lt;a href=&quot;https://fsreloading.com/lee-precision-3-jaw-spinner-stud.html&quot; target=&quot;_self&quot;&gt;&amp;nbsp;&lt;strong&gt;Lee Precision 3 Jaw Spinner Stud&lt;/strong&gt;&lt;/a&gt;&amp;nbsp;adapts the Lee Case Length Gauge and Shell holder to any electric drill for high speed trimming.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt; &lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p><strong>Lee Precision Progressive 1000 Shell Plate Carrier #11 Complete </strong>is used to change calibers on the<a href="/lee-pro-1000"> Progressive 1000 </a>Press. The carrier is attached to the Ram with a single socket head screw. This makes it very easy to change the entire carrier for caliber changing. Fits .<strong>44 Special, .44 Magnum and .45 Long Colt.</strong></p><p> </p><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Shell Plate</strong></li> <li><strong>Primer Feed </strong></li> <li><strong>Automatic Index</strong></li> <li><strong>Case Ejector</strong></li> <li><strong>Loaded Round Chute </strong></li> <li><strong>Case Feeder Adapter</strong></li> <li><strong>Spare Parts</strong></li> <li><strong>Case Sensor</strong></li></ul><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>WARNING:</strong></span> Use only CCI or Winchester brand primers. Other brands, especially Federal, can explode with sufficient force to seriously injure the user or persons nearby.</p>

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;&lt;p&gt;This is an updated version of the Lee TR2429 Carrier/Shell Holder which is obsolete and no longer available.&lt;/p&gt;&lt;p&gt;&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;Instructions for Lee Precision Pro 1000 presses made prior to 2018.&lt;/p&gt;&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTE:</span></h2><ul> <li><strong>If you order shell plates to convert to another caliber, with a different primer size, you will need to order the <strong>Pro 1000 Primer Attachment</strong></li></ul><p>. <!-- AKA_MPN --><p>This product is also known as <a href="/lee-precision-pro-shell-plate-11.html">90657</a></p><!-- AKA_MPN --><p>This product is also known as 90657</p>

&lt;p&gt;Lee Precision Replacement Hex Ratchets for the 3-Hole Turret Press and Pro 1000.&lt;br&gt;&lt;/p&gt;&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This part has been discontinued by Lee Precision and is no longer available.&lt;/p&gt;&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;&lt;p&gt;This product has been discontinued by Lee Precision. Availability is limited to the quantity in stock.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;&lt;p&gt;&lt;br&gt;&lt;/p&gt;&lt;h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;notES:&lt;/span&gt;&lt;/h2&gt;&lt;p&gt;This product has been discontinued by the manufacturer. It is sold as is without warranty. Availability is limited to the quantity in stock.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.