Product Name Cleanup — Phase 4

<p>The <strong>Lee Precision Powder Measure Kit</strong> is the safest way to reload ammunition. Powder density can vary by as much as 16%, you may be reducing your charge by considerably more than 10% with the dipper. Includes 15 graduated powder dippers from .3cc to 4.3cc. and a powder dispensing chart on a unique slide card with 95 listed powders. Since Powder measures cannot get out of adjustment, they continue to be poplular for the reloader who loads in small quantities. Powder Dippers can be purchased separately also.</p><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Includes:</span></h2><ul> <li><strong>15 Powder dippers: .3, .5, .7, 1.0, 1.3, 1.6, 1.9, 2.2, 2.5, 2.8, 3.1, 3.4, 3.7, 4.0, 4.3cc </strong></li> <li><strong>Powder Dispensing Slide Card</strong></li></ul><h2><strong><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Features:</span></strong></h2><ul> <li><strong>Reduces all maximum pressure loads by 10%</strong></li> <li><strong>Wash in soap & water to restore anti-static condition</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>Notes:</strong></span></h2><ul> <li><strong>Because we have no control over the use of these tool, manufacture and storage of the powder and components, we cannot accept responsibility for the use of these measures or tables.</strong></li> <li><strong>Only use load data that has been supplied by the powder manufacturer you intend to use.</strong></li> <li><strong>Click on "Man" Icon for Dipper Capacity Chart and catalog description</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Warning:</span></h2><ul> <li><strong>Ammunition reloading can be dangereous if done improperly and should not be attempted by persons not willing and able to read and follow instructions exactly.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li></ul><p> </p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>The <strong>Lee Precision .300 Winchester Magnum Collet Die </strong>preserves the perfect fit of your fire-formed cases, by sizing just the neck of your cases thus ensuring greater consistency, accuracy and increased case life. Neck-sized cases can last up to ten times longer than full length sized cases.</p><p>These results are achieved by using a collet to squeeze the case neck against a precision formed mandrel which creates a precisely aligned case neck with greatly reduced run-out. Neck sizing should only be used with cases that will be fired in the same gun. Neck sizing is not recommended for autoloaders, slide or lever action guns. If you need to load cartridges that will be fired in multiple, different guns, in autoloaders or slide or lever action guns, you should choose a full-length sizing die.</p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Includes:</span></h2><ul><li><strong>Steel Collet Neck Sizing Die</strong></li><li><strong>Custom fit plastic storage container<strong><img alt=&quot;&quot; src=&quot;/image/catalog/userfiles/collet(4).jpg&quot; style=&quot;opacity: 0.9; width: 118px; height: 400px; float: right;&quot;></strong></strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>Fits .300 Winchester Magnum.</strong></li><li><strong>Extends case life by sizing just the case neck.</strong></li><li><strong>Provides greater accuracy by preserving the fire-formed fit of your cases to your gun.</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>NOTES:</span></h2><ul><li><strong>No lubrication needed for case neck sizing.</strong></li><li><strong>Not recommend for autoloaders, slide or lever action guns.</strong></li><li><strong>Neck-sized cases can only be used in the gun in which they were previously fired.</strong></li></ul><h2><span style=&quot;background-color:#80B2FF;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>Photo Note:</strong></span></h2><p><strong>Die is shown with cutaway to reveal internal construction. Brass case in photo is for illustration purposes only and is not included.</strong></p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;The Lee Precision .30 M1 Carbine Factory Crimp Die with standard 7/8&quot; by 14 trheads is packaged in a custom fit plastic storage case with complete instructions.&lt;/p&gt;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;/lee-precision-resizing-lubricant.html&quot;&gt;Lubrication&lt;/a&gt;&lt;/strong&gt; is required.&lt;/p&gt;&lt;p&gt;&lt;strong style=&quot;line-height: 1.6em;&quot;&gt;Lee Precision Factory Crimp Dies&lt;/strong&gt;&lt;span style=&quot;line-height: 1.6em;&quot;&gt; are the only effective way to crimp Bottle Neck Rifle Cartridges&lt;strong&gt;.&lt;/strong&gt; This important step should be performed on all loads used for hunting. It crimps the bullet in place more firmly than any other tool. It is impossible to buckle the case, as with regular roll crimp dies. Trim length is not critical. Tests demonstrate that bullets which have no cannelure will shoot more accurately if crimped in place with the Lee Factory Crimp Die. &lt;/span&gt;&lt;/p&gt;&lt;p&gt;&lt;span style=&quot;line-height: 1.6em;&quot;&gt;Factory ammo is often more accurate and able to withstand rough handling because the bullet is firmly crimped in place. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. Even powder selection is less critical. &lt;/span&gt;&lt;/p&gt;&lt;p&gt;&lt;img alt=&quot;&quot; src=&quot;/image/catalog/userfiles/riflefactorycrimp.jpg&quot; style=&quot;width: .243 Winchesterpx; height: 323px; float: right; margin-left: 10px; margin-right: 10px;&quot; /&gt;&lt;/p&gt;&lt;p&gt; &lt;/p&gt;&lt;h2&gt;&lt;span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;&gt;INCLUDES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Caliper appropriate Hardened Steel Factory Crimp Die&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Plastic storage case&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Instructions&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2&gt;&lt;span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;&gt;&lt;strong&gt;FEATURES:&lt;/strong&gt;&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Crimps bullets in place more firmly with uniform pressure&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Adjusting screw to set the amount of crimp desired&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Produces more consistent and dependable ammo&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Eliminated magnum powder ignition problems&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2&gt;&lt;span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;&gt;NOTES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;&lt;a href=&quot;/lee-precision-resizing-lubricant.html&quot;&gt;Lubrication &lt;/a&gt;&lt;/strong&gt;required&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Will work with 22-K cases&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Trim length not critical&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Better accuracy with factory crimped ammo&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Fits Presses with standard 7/8&quot;-14 threads&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;&lt;a href=&quot;/press-shell-holders&quot;&gt;Shell holder sold separately&lt;/a&gt;&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Factory Crimp Die is included in the Lee Pacesetter 3-Die Sets&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt; &lt;/p&gt;

<p>The original paper instruction sheet included with Lee Factor Crimp Dies as supplied by Lee Precision. A digital version in PDF format is available for free download from our <a href="/index.php?route=product/manual"><strong>Product Manuals page</strong></a>.</p>

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

<p><strong>Lee Precision .25 WSSM (Winchester Super Short Magnum) Pacesetter 2-Die Set</strong><strong style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;&quot;> </strong><span style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;&quot;>has the same features and quality of Lee Precision`s standard dies. Includes a <strong>Full Length Sizing Die</strong> that allows you to restore any case to factory original dimensions, so you can fire form it in your gun. <a href=&quot;/lee-precision-resizing-lubricant.html&quot;>Lubrication </a>is needed with this Die. </span></p><p><span style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;&quot;>This die set also includes a <strong>Bullet Seating Die</strong> which is tapered on end for use with the Lee Automatic Bullet Feeder. It's universal free floating seating plug works with nearly any point style bullet. Finger adjustable seating depth eliminates fumbling with pliers to make simple seating depth adjustments. Half the price of competitive dies which most often do not include load data, which is priceless on odd or obsolete calibers. Lee factory crimp die is not included.</span></p><div style=&quot;clear: both;&quot;> </div><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Includes:</span></h2><ul style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 255);&quot;> <li><strong>Full Length Sizing Die (lubrication required)</strong></li> <li><strong>Bullet Seating Die with built in Roll Crimp</strong></li> <li><strong>Universal Shell Holder</strong></li> <li><strong>Powder Dipper</strong></li> <li><strong>Instructions/Load Data</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Notes:</span></h2><ul style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 255);&quot;> <li><strong>Lee factory crimp die is NOT included.</strong></li> <li><strong>For further Load Data try <strong><a href=&quot;http://www.hodgdon.com/&quot; target=&quot;_blank&quot;>HODGDON Powder Co.</a></strong></li></ul><h2><span style=&quot;background-color:#FFB84D;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Caution:</span></h2><ul style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 255);&quot;> <li><strong>Seating bullets excessively deep will reduce the case capacity and increase the pressure. It is extremely important that full wadcutter bullets be used with light loads only. You can select these by their reduced velocity.</strong></li> <li><strong>If using a Steel Sizer, be sure to lubricate your cases. Without lubrication, your die will be damaged and the case may become stuck in the die.</strong></li></ul><h2><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <a href=&quot;/caldwell-pro-range-glasses-with-yellow-lens-621193086.html&quot;>safety glasses</a> when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li> <li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li> <li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul><p> </p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;&lt;h2&gt;&lt;b style=&quot;background-color: rgb(255, 255, 0);&quot;&gt;FEATURES:&lt;/b&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Fits Lee Precision Full-length Size Die .25 Winchester Super Short Magnum.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Expands case mouth to aid bullet seating.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Made from steel.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

<p>This <strong>Lee Precision H&G #68 (Hensley & Gibbs) Double Cavity Bullet Mold</strong> produces .452 diameter 200 grain Semi Wad Cutter nose bullets suitable for .<strong>45 ACP (Automatic Colt Pistol), .45 Colt.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.</p><p><strong>Handles and sprue plate are included</strong>. The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><p><iframe width="400" height="225" frameborder="0" src="https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0" allowfullscreen=""></iframe></p><p>This <strong>Lee Precision H&G #68 (Hensley & Gibbs) Double Cavity Bullet Mold</strong> produces .452 diameter 200 grain Semi Wad Cutter nose bullets suitable for .<strong>45 ACP (Automatic Colt Pistol), .45 Colt.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.</p><p><strong>Handles and sprue plate are included</strong>. The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><div style="clear: both;"> </div><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Hardwood handles</strong></li> <li><strong>Hard anodized sprue plate</strong></li> <li><strong>Two Aluminum mold block halves</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">FEATURES:</span></span></h2><ul> <li><strong>Produces a bullet that fits 45 ACP, 45 Colt</strong></li> <li><strong>Bullet diameter: .452 inches</strong></li> <li><strong>Bullet weight: 200 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: N/A</strong></li> <li><strong>Distance from nose to first lube groove: N/A</strong></li> <li><strong>Bullet shape: Semi Wad Cutter nose</strong></li> <li><strong>Ballistic Coefficient: N/A</strong></li> <li><strong>2 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are CNC machined from aluminum for exacting precision</strong>.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged & bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href="/lee-precision-melter-110-v.html"> Lee Precision Melter 110 V </a>is the best method of melting your metal. Heat control is simple & your best bullets are poured with the <strong><a href="/lee-precision-lead-ladle.html">Lee Ladle</a>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a target="_blank" href="http://www.hodgdon.com/">HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 & 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" alt=""><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses</

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;Lee Precision 12 Gauge Load-All II includes 24 shot and powder bushings, bolts, crimp starters, safety charge bar, Spare wad guide, steel sizing ring, aluminum plate, pin, spring and primer guide.&lt;/p&gt;&lt;p style=&quot;line-height: 1.4em;&quot;&gt;There is a bewildering variety of shot shell reloaders available on the market today with an equally wide range of prices. Some of these machines are wondrous devices to watch in action. However, they also sport wonderous prices with many of them over $1,000 each. Such price levels are not justified for most scatter-gun shooters. We have found a more modest machine is a better match for the way most of us shoot. To meet this need, FS Reloading is pleased to offer the &lt;strong&gt;LOAD-ALL II from Lee Precision&lt;/strong&gt; (shown in the image at right).&lt;/p&gt;&lt;p style=&quot;line-height: 1.4em;&quot;&gt;Shells produced by the Lee Precision Load-All II not only look better than those loaded on machines costing hundreds of dollars more. They also produce more uniform velocity and patterns. You can load just as fast on a Lee Precision Load-All II as with any other brand of loader.&lt;/p&gt;&lt;p style=&quot;line-height: 1.4em;&quot;&gt;Twenty-four shot and powder bushings are included free. The bushings alone can cost several dollars each from other manufacturers, and they're not as accurate as those made by Lee Precision. Only Lee Precision supplies molded bushings.&lt;/p&gt;&lt;p style=&quot;line-height: 1.4em;&quot;&gt;The Load-All II is a time proven tool with hundreds of thousands in use world-wide. In over forty years, we have yet to see one worn out.&lt;/p&gt;&lt;h2&gt;&lt;span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;&gt;INCLUDES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Bolts (2) with locking nuts and screw (1)&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Crimp starters, 6 and 8 point&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Safety charge bar &amp;amp; powder bushings&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Spare wad guide&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Steel sizing ring&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Aluminum plate&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Pin and spring&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Primer guide&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 style=&quot;line-height: 1.4em;&quot;&gt;&lt;span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;&gt;&lt;strong&gt; FEATURES:&lt;/strong&gt;&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Shot hopper holds over 5 lbs. of shot, enough to load over 125 rounds&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Built-in primer catcher with an easy-to-empty door right up front&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Recesses at every station for speedy shell positioning&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Easy and economical gauge conversion supports &lt;a href=&quot;/lee-precision-conversion-kit-12-gauge.html&quot; style=&quot;color: rgb(161, 0, 0);&quot;&gt;12 gauge&lt;/a&gt;, &lt;a href=&quot;/lee-precision-conversion-kit-16-gauge.html&quot; style=&quot;color: rgb(161, 0, 0);&quot;&gt;16 gauge&lt;/a&gt; and &lt;a href=&quot;/lee-precision-conversion-kit-20-gauge.html&quot; style=&quot;color: rgb(161, 0, 0);&quot;&gt;20 gauge&lt;/a&gt; shells&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Adjustable from the standard 2 3/4 shell, up to 3 inch shell&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 style=&quot;line-height: 1.4em;&quot;&gt;&lt;strong&gt;&lt;span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;&gt;NOTE:&lt;/span&gt;&lt;/strong&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li style=&quot;line-height: 1.4em;&quot;&gt;At this time, Lee Precision has no plans to produce a Load-All II in 10 gauge, 28 gauge or .410.&lt;/strong&gt;&lt;/li&gt;&lt;li style=&quot;line-height: 1.4em;&quot;&gt;This press cannot load 2 1/2&quot; or 3 1/2&quot; shells.&lt;/strong&gt;&lt;/li&gt;&lt;li style=&quot;line-height: 1.4em;&quot;&gt;For extra Bushings order, &lt;a href=&quot;/chrg-bar-and-bushings.html&quot;&gt;&lt;strong&gt;Lee's Charge Bar Kit (item #LA1057).&lt;/strong&gt;&lt;/a&gt; Includes Charge Bar &amp;amp; 24 Shot &amp;amp; Powder Bushings.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2&gt; &lt;/h2&gt;

<p><strong>Lee Precision Load Master Small Primer Feeder</strong> for quick change to the small primer size for the Load Master Press.</p>Includes:<ul><li><strong>Tray</strong></li><li><strong>Trough</strong></li><li><strong>Primer Pin</strong></li><li><strong>Lever</strong></li><li><strong>1 Pin Spring</strong></li></ul>Photo Notes:<ul><li><strong>Photo shows red translucent plastic box. Lee Precision recently changed packaging of the Small Primer Feeder to a black plastic hinge top box.</strong></li></ul>

&lt;p&gt;This &lt;strong&gt;Lee Precision Case Length Gauge&lt;/strong&gt; is the easiest way to trim &lt;strong&gt;.338 Winchester Magnum &lt;/strong&gt;cases to the proper length while squaring case mouths at the same time. The hardened steel Case Length Gauge is precisely sized to produce cases perfectly trimmed to the SAAMI (Sporting Arms and Ammunition Manufacturers' Institute) standard length. The specially designed shell holder helps keep everything square.&lt;/p&gt;&lt;p&gt;The Lee Case Length Gauge and Shell holder works in conjunction with &lt;strong&gt;LEE's Cutter and Lock Stud&lt;/strong&gt; (as shown in the image below) and with the &lt;strong&gt;LEE Cutter with Ball Grip&lt;/strong&gt; and /or &lt;strong&gt;LEE Zip Trim&lt;/strong&gt; to produce consistently trimmed and squared cases with no guesswork and no measuring required.&lt;/p&gt;&lt;p&gt;If you're looking for a simple, no hassle way to quickly trim and square your cases to SAAMI standards, this is the tool for you.&lt;/p&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);=&quot;&quot; clear:=&quot;&quot; both;&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;INCLUDES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li style=&quot;clear: both;&quot;&gt;&lt;strong&gt;Caliber Specific Case Length Gauge&lt;/strong&gt;&lt;/li&gt;&lt;li style=&quot;clear: both;&quot;&gt;&lt;strong&gt;Shell holder&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;img alt=&quot;Lee Precision Case Lenght Gage and Shellholder in use with Lee Precision Cutter and Lock stud&quot; src=&quot;https://fsreloading.com/image/catalog/userfiles/ForSafetySakeTrimCases400.jpg&quot; style=&quot;width: 400px; height: 174px; float: right; margin-left: 10px; margin-right: 10px;&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;FEATURES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Made from hardened steel to retain accuracy.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Trims cases square every time when used with the&amp;nbsp;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-and-lock-stud.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter and Lock Stud&lt;/a&gt;.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;NOTES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Requires the&lt;strong&gt;&amp;nbsp;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-and-lock-stud.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter and Lock Stud&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;which is sold separately.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;FS Reloading recommends The&amp;nbsp;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-with-ball-grip.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter with Ball Grip&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;makes holding the cutter easier, the&amp;nbsp;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/lee-precision-zip-trim.html&quot; target=&quot;_self&quot;&gt;Lee Precision Zip Trim&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;can be added to reduce trimming time, and the&lt;a href=&quot;https://fsreloading.com/lee-precision-3-jaw-spinner-stud.html&quot; target=&quot;_self&quot;&gt;&amp;nbsp;&lt;strong&gt;Lee Precision 3 Jaw Spinner Stud&lt;/strong&gt;&lt;/a&gt;&amp;nbsp;adapts the Lee Case Length Gauge and Shell holder to any electric drill for high speed trimming.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt; &lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p><strong>Lee Precision .223 WSSM (Winchester Super Short Magnum) Pacesetter 2-Die Set</strong><strong style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;&quot;> </strong><span style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;&quot;>has the same features and quality of Lee Precision`s standard dies. Includes a <strong>Full Length Sizing Die</strong> that allows you to restore any case to factory original dimensions, so you can fire form it in your gun. <strong><a href=&quot;/lee-precision-resizing-lubricant.html&quot;>Lubrication </a></strong>is needed with this Die. </span></p><p><span style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;&quot;>This die set also includes a <strong>Bullet Seating Die</strong> which is tapered on end for use with the Lee Automatic Bullet Feeder. It's universal free floating seating plug works with nearly any point style bullet. Finger adjustable seating depth eliminates fumbling with pliers to make simple seating depth adjustments. Half the price of competitive dies which most often do not include load data, which is priceless on odd or obsolete calibers. Lee factory crimp die is not included. </span></p><p><strong>Lee Precision .223 Winchester Super Short Magnum (Winchester Super Short Magnum) Pacesetter 2-Die Set</strong><strong style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;&quot;> </strong><span style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;&quot;>has the same features and quality of Lee Precision`s standard dies. Includes a <strong>Full Length Sizing Die</strong> that allows you to restore any case to factory original dimensions, so you can fire form it in your gun. <strong><a href=&quot;/lee-precision-resizing-lubricant.html&quot;>Lubrication </a></strong>is needed with this Die. This die set also includes a <strong>Bullet Seating Die</strong> which is tapered on end for use with the Lee Automatic Bullet Feeder. It's universal free floating seating plug works with nearly any point style bullet. Finger adjustable seating depth eliminates fumbling with pliers to make simple seating depth adjustments. Half the price of competitive dies which most often do not include load data, which is priceless on odd or obsolete calibers. Lee factory crimp die is not included. </span></p><div style=&quot;clear: both;&quot;> </div><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Includes:</span></h2><ul style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 255);&quot;> <li><strong>Full Length Sizing Die (lubrication required)</strong></li> <li><strong>Bullet Seating Die with built in Roll Crimp</strong></li> <li><strong>Universal Shell Holder</strong></li> <li><strong>Powder Dipper</strong></li> <li><strong>Instructions/Load Data</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Notes:</span></h2><ul style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 255);&quot;> <li><strong>Lee factory crimp die is NOT included.</strong></li> <li><strong>For further Load Data try <strong><a target=&quot;_blank&quot; href=&quot;http://www.hodgdon.com/&quot;>HODGDON Powder Co.</a></strong></li></ul><h2><span style=&quot;background-color:#FFB84D;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Caution:</span></h2><ul style=&quot;color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 255);&quot;> <li><strong>Seating bullets excessively deep will reduce the case capacity and increase the pressure. It is extremely important that full wadcutter bullets be used with light loads only. You can select these by their reduced velocity.</strong></li> <li><strong>If using a Steel Sizer, be sure to lubricate your cases. Without lubrication, your die will be damaged and the case may become stuck in the die.</strong></li></ul><h2><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <a href=&quot;/caldwell-pro-range-glasses-with-yellow-lens-621193086.html&quot;>safety glasses</a> when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li> <li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li> <li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul><p> </p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;&lt;/p&gt;&lt;p&gt;The &lt;strong&gt;Lee Precision R11 Universal Shell Holder&lt;/strong&gt; fits &lt;strong&gt;.44 Special .44 Smith &amp;amp; Wesson Special .44 Remington Magnum 10.9x33mmR .45 Colt .45 Long Colt .45LC .444 Marlin &lt;/strong&gt;and&lt;strong&gt; .454 Casull&lt;/strong&gt; and similar cases. It is made from hardened steel which has been machined to close tolerance for maximum accuracy. It works with most brands of Single Stage Presses and 3 or 4 hole Turret Reloading Presses. Not for use with Lee's Auto Prime or Lee's hand priming tools.&lt;/p&gt;&lt;h2&gt;&lt;b style=&quot;background-color: rgb(255, 255, 0);&quot;&gt;FEATURES:&lt;/b&gt;&lt;/h2&gt;&lt;ul&gt; &lt;li&gt;&lt;strong&gt;Made from hardened steel.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2&gt;&lt;strong style=&quot;background-color: rgb(255, 255, 0);&quot;&gt;FITS:&lt;/strong&gt;&lt;/h2&gt;&lt;ul&gt; &lt;li&gt;&lt;strong&gt;.356 Winchester Magnum&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.357-.44 Bain-Davis&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.44 Colt&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.44 Remington Magnum 10.9x33mmR&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.45 Colt .45 Long Colt .45LC&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.44 Smith &amp;amp; Wesson Russian&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.44 Special .44 Smith &amp;amp; Wesson Special&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.454 Casull&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.50 A&amp;amp;E&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.30 Alaskan&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.30 Bellam&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.303 Savage&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.375 JDJ&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;.444 Marlin&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;8x68mm Magnum&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;strong&gt;NOTES:&lt;/strong&gt;&lt;p&gt;&lt;/p&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Compare to Hornady Shell Holder #33&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

<p><strong>Lee Precision .284 Winchester Pacesetter 2-Die Set</strong><strong style="color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;"> </strong><span style="color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;">has the same features and quality of Lee Precision`s standard dies. Includes a <strong>Full Length Sizing Die</strong> that allows you to restore any case to factory original dimensions, so you can fire form it in your gun. <a href="/lee-precision-resizing-lubricant.html">Lubrication </a>is needed with this Die. </span></p><p><span style="color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; line-height: 1.4em;">This die set also includes a <strong>Bullet Seating Die</strong> which is tapered on end for use with the Lee Automatic Bullet Feeder. It's universal free floating seating plug works with nearly any point style bullet. Finger adjustable seating depth eliminates fumbling with pliers to make simple seating depth adjustments. Half the price of competitive dies which most often do not include load data, which is priceless on odd or obsolete calibers. Lee factory crimp die is not included. </span></p><div style="clear: both;"> </div><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Includes:</span></h2><ul style="color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 255);"> <li><strong>Full Length Sizing Die (lubrication required)</strong></li> <li><strong>Bullet Seating Die with built in Roll Crimp</strong></li> <li><strong>Universal Shell Holder</strong></li> <li><strong>Powder Dipper</strong></li> <li><strong>Instructions/Load Data</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Notes:</span></h2><ul style="color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 255);"> <li><strong>Lee factory crimp die is NOT included.</strong></li> <li><strong>For further Load Data try <strong><a href="http://www.hodgdon.com/" target="_blank">HODGDON Powder Co.</a></strong> <h2><span style="background-color:#FFB84D;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Caution:</span></h2> <ul style="color: rgb(88, 89, 91); font-family: verdana, arial, helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 255);"> <li><strong>Seating bullets excessively deep will reduce the case capacity and increase the pressure. It is extremely important that full wadcutter bullets be used with light loads only. You can select these by their reduced velocity.</strong></li> <li><strong>If using a Steel Sizer, be sure to lubricate your cases. Without lubrication, your die will be damaged and the case may become stuck in the die.</strong></li> </ul> <h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2> <p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p> <ul> <li><strong>Always wear <a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses</a> when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li> <li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li> <li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li> </ul> <p> </p> </strong></li></ul>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .338 diameter, 220 grain round nose bullets suitable for .<strong>338 Caliber.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel.<strong> </strong></p><p>Handles included. Gas checks not included.</p><p>All Lee Precision Mold Blocks are made from aluminum because of the exceptional molding qualities. Lee molds feature trochoidal venting on the mold face and sprue plate mating surface.This unique venting allows consisstent and effortless fill out. The mold cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee molds can be used as cast without sizing</p><p><strong><img style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" alt="" /><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing Exposure supplied with product.</strong></p><p><iframe width="400" height="225" frameborder="0" src="https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0" allowfullscreen=""></iframe></p><p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .338 diameter, 220 grain round nose bullets suitable for .<strong>338 Caliber.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.</p><p><strong>Handles and sprue plate are included. </strong>The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><div style="clear: both;"> </div><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Hardwood handles</strong></li> <li><strong>Hard anodized sprue plate</strong></li> <li><strong>Two Aluminum mold block halves</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">FEATURES:</span></span></h2><ul> <li><strong>Produces a bullet that fits .338 Caliber.</strong></li> <li><strong>Bullet diameter: .338 inches</strong></li> <li><strong>Bullet weight: 220 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: N/A</strong></li> <li><strong>Distance from nose to first lube groove: N/A</strong></li> <li><strong>Bullet shape: Round nose</strong></li> <li><strong>Ballistic Coefficient: N/A</strong></li> <li><strong>2 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are CNC machined from aluminum for exacting precision</strong>.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged & bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href="/lee-precision-melter-110-v.html"> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple & your best bullets are poured with the <strong><a href="/lee-precision-lead-ladle.html">Lee Ladle</a></strong>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a target="_blank" href="http://www.hodgdon.com/">HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 & 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" alt="" /><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;paddi

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .285 diameter, 130 grain round nose bullets suitable for <strong>7mm.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. </p><p>Handles included. Gas checks not included. </p><p>All Lee Precision Mold Blocks are made from aluminum because of the exceptional molding qualities. Lee molds feature trochoidal venting on the mold face and sprue plate mating surface.This unique venting allows consisstent and effortless fill out. The mold cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee molds can be used as cast without sizing</p><p><iframe width=&quot;400&quot; height=&quot;225&quot; frameborder=&quot;0&quot; src=&quot;https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0&quot; allowfullscreen=&quot;&quot;></iframe></p><p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .285 diameter, 130 grain round nose bullets suitable for <strong>7mm.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.</p><p><strong>Handles and sprue plate are included. </strong>The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><div style=&quot;clear: both;&quot;> </div><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>INCLUDES:</span></h2><ul> <li><strong>Hardwood handles</strong></li> <li><strong>Hard anodized sprue plate</strong></li> <li><strong>Two Aluminum mold block halves</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><span style=&quot;line-height: 1.2em;&quot;>FEATURES:</span></span></h2><ul> <li><strong>Produces a bullet that fits 7mm.</strong></li> <li><strong>Bullet diameter: .285 inches</strong></li> <li><strong>Bullet weight: 130 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: N/A</strong></li> <li><strong>Distance from nose to first lube groove: N/A</strong></li> <li><strong>Bullet shape: Round nose</strong></li> <li><strong>Ballistic Coefficient: N/A</strong></li> <li><strong>2 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are CNC machined from aluminum for exacting precision</strong>.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged &amp; bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href=&quot;/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html&quot;>Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href=&quot;/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html&quot;>Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href=&quot;/lee-precision-melter-110-v.html&quot;> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple &amp; your best bullets are poured with the <strong><a href=&quot;/lee-precision-lead-ladle.html&quot;>Lee Ladle</a>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends<strong> <a href=&quot;/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html&quot;>Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a target=&quot;_blank&quot; href=&quot;http://www.hodgdon.com/&quot;>HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href=&quot;/lee-precision-modern-reloading-2nd-edition.html&quot;>Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 &amp; 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable &amp; harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img style=&quot;width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;&quot; src=&quot;/image/catalog/userfiles/YellowWarningTransparent(1).png&quot; alt=&quot;&quot; /><span style=&quot;color: rgb(255, 255, 255);&quot;><span style=&quot;background-color: rgb(255, 0, 0);&quot;> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style=&quot;line-height: 1.2em;&quot;> <strong> </strong></span><strong style=&quot;line-height: 1.2em;&quot;><em style=&quot;line-height: 1.2em;&quot;>IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</st

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .314 diameter 90 grain, Semi Wad Cutter nose bullets suitable for <strong>32/20 WCF (Winchester Center Fire), .32 S&amp;W Long, .32 Colt New Police.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. <strong>Handles are included.</strong></p><p><span style=&quot;line-height: 1.6em;&quot;>All Lee Precision Mold Blocks are made from aluminum because of the exceptional molding qualities. Lee molds feature trochoidal venting on the mold face and sprue plate mating surface.This unique venting allows consisstent and effortless fill out. The mold cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee molds can be used as cast without sizing</span></p><h2> </h2><p><strong><img style=&quot;width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;&quot; src=&quot;/image/catalog/userfiles/YellowWarningTransparent(1).png&quot; alt=&quot;&quot; /><span style=&quot;color: rgb(255, 255, 255);&quot;><span style=&quot;background-color: rgb(255, 0, 0);&quot;> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing Exposure supplied with product.</strong></p><p><iframe width=&quot;400&quot; height=&quot;225&quot; frameborder=&quot;0&quot; src=&quot;https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0&quot; allowfullscreen=&quot;&quot;></iframe></p><p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .314 diameter 90 grain, Semi Wad Cutter nose bullets suitable for <strong>32/20 WCF (Winchester Center Fire), .32 S&amp;W Long, .32 Colt New Police.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.</p><p><span style=&quot;line-height: 1.6em;&quot;>All Lee Precision Mold Blocks are made from aluminum because of the exceptional molding qualities. Lee molds feature trochoidal venting on the mold face and sprue plate mating surface.This unique venting allows consisstent and effortless fill out. The mold cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee molds can be used as cast without sizing</span></p><p><strong>Handles and sprue plate are included.</strong> The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>INCLUDES:</span></h2><ul> <li><strong>Hardwood handles</strong></li> <li><strong>Hard anodized sprue plate</strong></li> <li><strong>Two Aluminum mold block halves</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><span style=&quot;line-height: 1.2em;&quot;>FEATURES:</span></span></h2><ul> <li><strong>Produces a bullet that fits 32/20 WCF, 32S&amp;W Long, 32 Colt NP</strong></li> <li><strong>Bullet diameter: .314 inches</strong></li> <li><strong>Bullet weight: 90 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: .565 inches</strong></li> <li><strong>Distance from nose to first lube groove: .220 inches</strong></li> <li><strong>Bullet shape: Semi Wad Cutter nose </strong></li> <li><strong>Ballistic Coefficient: .100 </strong></li> <li><strong>2 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are CNC machined from aluminum for exacting precision</strong>.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged &amp; bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href=&quot;/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html&quot;>Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href=&quot;/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html&quot;>Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href=&quot;/lee-precision-melter-110-v.html&quot;> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple &amp; your best bullets are poured with the <strong><a href=&quot;/lee-precision-lead-ladle.html&quot;>Lee Ladle</a></strong>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href=&quot;/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html&quot;>Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a target=&quot;_blank&quot; href=&quot;http://www.hodgdon.com/&quot;>HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href=&quot;/lee-precision-modern-reloading-2nd-edition.html&quot;>Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 &amp; 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable &amp; harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img style=&quot;width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;&quot; src=&quot;/image/catalog/userfiles/YellowWarningTransparent(1).png&quot; alt=&quot;&quot; /><span style=&quot;color: rgb(255, 255, 255);&quot;><span style=&quot;background-color: rgb(255, 0, 0);&quot;> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style=&quot;line-height: 1.2em;&quot;> <strong> </strong></span><strong style=&quot;line-height: 1.2em;&quot;><em style=&quot;line-height: 1.2em;&quot;>IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .309 diameter, 180 grain round nose bullets suitable for .<strong>30 Caliber Rifle.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel.</p><p>Handles included. Gas checks not included. </p><p>All Lee Precision Mold Blocks are made from aluminum because of the exceptional molding qualities. Lee molds feature trochoidal venting on the mold face and sprue plate mating surface.This unique venting allows consisstent and effortless fill out. The mold cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee molds can be used as cast without sizing</p><p><iframe width="400" height="225" frameborder="0" src="https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0" allowfullscreen=""></iframe></p><p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .309 diameter, 180 grain round nose bullets suitable for .<strong>30 Caliber Rifle.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.</p><p><strong>Handles and sprue plate are included</strong>. The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><div style="clear: both;"> </div><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Hardwood handles</strong></li> <li><strong>Hard anodized sprue plate</strong></li> <li><strong>Two Aluminum mold block halves</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">FEATURES:</span></span></h2><ul> <li><strong>Produces a bullet that fits .30 Caliber Rifle.</strong></li> <li><strong>Bullet diameter: .309 inches</strong></li> <li><strong>Bullet weight: 180 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: N/A</strong></li> <li><strong>Distance from nose to first lube groove: N/A</strong></li> <li><strong>Bullet shape: Round nose</strong></li> <li><strong>Ballistic Coefficient: N/A</strong></li> <li><strong>2 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are CNC machined from aluminum for exacting precision</strong>.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged & bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href="/lee-precision-melter-110-v.html"> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple & your best bullets are poured with the <strong><a href="/lee-precision-lead-ladle.html">Lee Ladle</a>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a target="_blank" href="http://www.hodgdon.com/">HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 & 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" alt="" /><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses </a></strong>when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;Lee #6s Quick change shell plate for the Load-Master Press.&lt;/p&gt;&lt;p&gt;For the .32-20 Winchester, .25-20 Winchester and similar cases.&lt;/p&gt;

<p><strong>Lee Precision Progressive 1000 Shell Plate Carrier #4 Complete </strong>is used to change calibers on the <a href="/lee-pro-1000">Progressive 1000 </a>Press. The carrier is attached to the Ram with a single socket head screw. This makes it very easy to change the entire carrier for caliber changing. Fits <strong>.222 Remington, .223 Remington, .380 ACP (Automatic Colt Pistol), .32 S&W Long (Smith & Wesson), .32 H&R Magnum (Harrington & Richardson).</strong></p><p> </p><p> </p><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">INCLUDES:</span></span></h2><ul> <li><strong>Shell Plate</strong></li> <li><strong>Primer Feed </strong></li> <li><strong>Automatic Index</strong></li> <li><strong>Case Ejector</strong></li> <li><strong>Loaded Round Chute </strong></li> <li><strong>Case Feeder Adapter</strong></li> <li><strong>Spare Parts</strong></li> <li><strong>Case Sensor</strong></li></ul><p><span style="line-height: 1.6em; background-color: rgb(255, 0, 0); color: rgb(255, 255, 255); font-weight: bold; padding: 3px 7px; text-transform: uppercase;"><strong>WARNING:</strong></span><span style="line-height: 1.6em;"> Use only CCI or Winchester brand primers. Other brands, especially Federal, can explode with sufficient force to seriously injure the user or persons nearby.</span></p>

&lt;p&gt;This &lt;strong&gt;Lee Precision Case Length Gauge&lt;/strong&gt; is the easiest way to trim &lt;strong&gt;.220 Swift &lt;/strong&gt;cases to the proper length while squaring case mouths at the same time. The hardened steel Case Length Gauge is precisely sized to produce cases perfectly trimmed to the SAAMI (Sporting Arms and Ammunition Manufacturers' Institute) standard length. The specially designed shell holder helps keep everything square.&lt;/p&gt;&lt;p&gt;The Lee Case Length Gauge and Shell holder works in conjunction with &lt;strong&gt;LEE's Cutter and Lock Stud&lt;/strong&gt; (as shown in the image below) and with the &lt;strong&gt;LEE Cutter with Ball Grip&lt;/strong&gt; and /or &lt;strong&gt;LEE Zip Trim&lt;/strong&gt; to produce consistently trimmed and squared cases with no guesswork and no measuring required.&lt;/p&gt;&lt;p&gt;If you're looking for a simple, no hassle way to quickly trim and square your cases to SAAMI standards, this is the tool for you.&lt;/p&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);=&quot;&quot; clear:=&quot;&quot; both;&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;INCLUDES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li style=&quot;clear: both;&quot;&gt;&lt;strong&gt;Caliber Specific Case Length Gauge&lt;/strong&gt;&lt;/li&gt;&lt;li style=&quot;clear: both;&quot;&gt;&lt;strong&gt;Shell holder&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;img alt=&quot;Lee Precision Case Lenght Gage and Shellholder in use with Lee Precision Cutter and Lock stud&quot; src=&quot;https://fsreloading.com/image/catalog/userfiles/ForSafetySakeTrimCases400.jpg&quot; style=&quot;width: 400px; height: 174px; float: right; margin-left: 10px; margin-right: 10px;&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;FEATURES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Made from hardened steel to retain accuracy.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Trims cases square every time when used with the&amp;nbsp;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-and-lock-stud.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter and Lock Stud&lt;/a&gt;.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 open=&quot;&quot; sans&quot;,=&quot;&quot; sans-serif;=&quot;&quot; color:=&quot;&quot; rgb(0,=&quot;&quot; 0,=&quot;&quot; 0);&quot;=&quot;&quot; style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;NOTES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Requires the&lt;strong&gt;&amp;nbsp;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-and-lock-stud.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter and Lock Stud&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;which is sold separately.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;FS Reloading recommends The&amp;nbsp;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/lee-precision-cutter-with-ball-grip.html&quot; target=&quot;_self&quot;&gt;Lee Precision Cutter with Ball Grip&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;makes holding the cutter easier, the&amp;nbsp;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/lee-precision-zip-trim.html&quot; target=&quot;_self&quot;&gt;Lee Precision Zip Trim&lt;/a&gt;&lt;/strong&gt;&amp;nbsp;can be added to reduce trimming time, and the&lt;a href=&quot;https://fsreloading.com/lee-precision-3-jaw-spinner-stud.html&quot; target=&quot;_self&quot;&gt;&amp;nbsp;&lt;strong&gt;Lee Precision 3 Jaw Spinner Stud&lt;/strong&gt;&lt;/a&gt;&amp;nbsp;adapts the Lee Case Length Gauge and Shell holder to any electric drill for high speed trimming.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;p&gt; &lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p><strong>Lee Precision PaceSetter 3-Die .300 Winchester Magnum Set</strong> includes the exclusive <strong>Lee Factory Crimp die.</strong> It crimps the bullet in place more firmly than any other tool which prevent buckling of the case and makes for more accurate shooting. The die set also includes a <strong>Bullet Seating Die</strong> that works with almost any point style bullet. A simple finger adjustment is all that is needed to adjust the seating depth. If you are reloading for more than one firearm or reloading cases that were fired in other firearms the <strong>Full Length Sizer Die</strong> is a must. These dies are your best buy. They also include a shell holder, powder dipper, load data and are packed in a durable storage box. <br></p><div style="clear: both;"> </div><h2><span style="background-color:Yellow;"><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span><img alt="Lee precision factory crimp die cutaway" src="/image/catalog/userfiles/sizingdie.jpg" style="width: 89px; height: 275px; float: right; margin-left: 100px; margin-right: 100px;"></span></h2><ul><li><strong>Full Length Sizer Die (image shown at right)</strong></li><li><strong>Bullet Seating Die</strong></li><li><strong>Factory Crimp Die</strong></li><li><strong>Built In Stuck Case Remover</strong></li><li><strong>EZ X Expander</strong></li><li><strong>Shell Holder</strong></li><li><strong>Powder Dipper</strong></li><li><strong>Load Data</strong></li><li><strong>Instructions</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>Notes:</strong></span></h2><ul><li><strong>For further Load Data try <strong><a href="http://www.hodgdon.com/" target="_blank">HODGDON Powder Co.</a></strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul><li><strong>Always wear <a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses</a> when reloading and shooting.</strong></li><li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li><li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li><li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li><li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul><p> </p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;The &lt;strong&gt;Lee Precision Shell Holder #1 &lt;/strong&gt;fits &lt;strong&gt;.22 Remington Jet .256 Winchester Magnum .38 Smith &amp;amp; Wesson .38 Colt New Police .38 Short Colt .38 Long Colt .38 Special .357 Magnum&lt;/strong&gt; and &lt;strong&gt;.41 Long Colt&lt;/strong&gt; cases. It is made from hardened steel which has been machined to close tolerance for use with the Lee New Auto Prime Lee Ergo Prime Lee Auto Bench Prime and the Frankford Arsenal Hand Priming Tool&lt;/p&gt;&lt;h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;&lt;span style=&quot;line-height: 1.2em;&quot;&gt;FEATURES:&lt;/span&gt;&lt;/span&gt;&lt;/h2&gt;&lt;h2&gt;&lt;ul style=&quot;font-size: 12px;&quot;&gt;&lt;li&gt;&lt;strong&gt;Made from hardened steel&lt;/strong&gt;.&lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;&lt;h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;&lt;strong&gt;FITS:&lt;/strong&gt;&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt; &lt;li&gt;&lt;strong&gt;.22 Remington Jet&lt;/strong&gt;&lt;/li&gt; &lt;li&gt;&lt;strong&gt;.256 Winchester Magnum&lt;/strong&gt;&lt;/li&gt; &lt;li&gt;&lt;strong&gt;.38 Smith &amp;amp; Wesson&lt;/strong&gt;&lt;/li&gt; &lt;li&gt;&lt;strong&gt;.38 Colt New Police&lt;/strong&gt;&lt;/li&gt; &lt;li&gt;&lt;strong&gt;.38 Short Colt&lt;/strong&gt;&lt;/li&gt; &lt;li&gt;&lt;strong&gt;.38 Long Colt&lt;/strong&gt;&lt;/li&gt;&lt;strong&gt;.38 Special&lt;/strong&gt; &lt;li&gt;&lt;strong&gt;.357 Magnum&lt;/strong&gt;&lt;/li&gt; &lt;li&gt;&lt;strong&gt;.41 Long Colt&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;&gt;NOTES:&lt;/span&gt;&lt;/h2&gt;&lt;h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;ul style=&quot;margin-bottom: 8.5px; font-size: 12px;&quot;&gt;&lt;li&gt;&lt;strong&gt;For hand priming with the Lee Precision and Frankford Arsenal hand priming tools.&lt;/strong&gt;&lt;/li&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/departments/reloading-equipment/priming-tools/lee-precision-ergo-prime.html&quot;&gt;Lee Precision Ergo Prime&lt;/a&gt;&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/departments/reloading-equipment/priming-tools/lee-precision-new-auto-prime.html&quot;&gt;Lee Precision New Auto-Prime&lt;/a&gt;&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/departments/reloading-equipment/priming-tools/lee-precision-auto-bench-prime-2125583958.html&quot;&gt;Lee Precision Auto Bench Prime&lt;/a&gt;&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;&lt;a href=&quot;https://fsreloading.com/departments/reloading-equipment/priming-tools/frankford-arsenal-perfect-seat-hand-primer.html&quot;&gt;Frankford Arsenal Perfect Seat Hand Primer&lt;/a&gt;&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;li&gt;&lt;strong&gt;Will not work with reloading presses.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;/h2&gt;

Part SH1027 - 1 required for Lee Precision products

<p>The <strong>Lee Precision R2 Universal Shell Holder</strong> fits <strong>.44 Auto Mag., .45 Auto, .22 BR Remington, .224 Clark (.22-257), .22-250 Remington, .240 Weatherby, .243 Winchester, 6mm Remington, .244 Remington, 6mm International, 6mm-250 Savage, 6mm-284, 6mm-06, .25-284, .25-06 Remington, .250 Savage, .257 Roberts, 6.5x52mm Mannlicher-Carcano, 6.5x52mm Parravicini-Carcano, 6.5x52mm Carcano, .270 Winchester, .280 Remington, 7mm-08 Remington, 7mm BR Remington, 7x57mm Mauser, .284 Winchester, .308 Winchester, 7.62x51mm NATO</strong> and <strong>.30-06 Springfield cases</strong>. It is made from hardened steel which has been machined to close tolerance for maximum accuracy. It works with most brands of Single Stage Presses and 3 or 4 hole Turret Reloading Presses. Not for use with Lee's Auto Prime or Lee's hand priming tools.</p><p> </p><h2><strong>FEATURES:</strong></h2><ul><li><strong>Made from hardened steel</strong>.</strong></li></ul><h2><strong><strong>FITS:</strong></strong></h2><ul><li><strong>.44 Auto Magnum</strong></li><li><strong>.45 ACP</strong></li><li><strong>.22 BR Remington</strong></li><li><strong>.224 Clark (.22-257)</strong></li><li><strong>.22-250 Remington</strong></li><li><strong>.240 Weatherby</strong></li><li><strong>.243 Winchester</strong></li><li><strong>6mm Remington</strong></li><li><strong>.244 Remington</strong></li><li><strong>6mm International</strong></li><li><strong>6mm-250 Savage</strong></li><li><strong>6mm-284</strong></li><li><strong>6mm-06</strong></li><li><strong>.25-284</strong></li><li><strong>.25-06 Remington</strong></li><li><strong>.250 Savage</strong></li><li><strong>.257 Roberts</strong></li><li><strong>6.5x52mm Mannlicher-Carcano</strong></li><li><strong>6.5x52mm Parravicini-Carcano</strong></li><li><strong>6.5x52mm Carcano</strong></li><li><strong>.270 Winchester</strong></li><li><strong>.280 Remington</strong></li><li><strong>7mm-08 Remington</strong></li><li><strong>7mm BR Remington</strong></li><li><strong>7x57mm Mauser</strong></li><li><strong>.284 Winchester</strong></li><li><strong>.308 Winchester </strong></li><li><strong>7.62x51mm NATO</strong></li><li><strong>.30-06 Springfield </strong></li></ul><h2><strong>NOTES: </strong></h2><ul><li><strong>Not for use with Lee Precision Auto Prime XR or Lee Ergo Prime.</strong></li><li><strong>Compare to <a href=&quot;/hornady-shell-holder-1-22-250-remington-308-winchester-30-06-springfield-1304465393.html&quot;>Hornady Shell Holder #1</a>&amp;nbsp;and <a href=&quot;/hornady-shell-holder-45-1042807414.html&quot;>Hornady Shell Holder #45</a>.&amp;nbsp;</strong></li></ul>

&lt;p&gt;Instructions for the &lt;strong&gt;Lee Precision .303 British 3-Die Set&lt;/strong&gt;. Comprehensive Load Data can be found in the &lt;a href=&quot;/lee-precision-modern-reloading-2nd-edition.html&quot;&gt;&lt;strong&gt;&quot;Modern Reloading&quot;&lt;/strong&gt; 2nd edition book (#90277) &lt;/a&gt;by Richard Lee. It Contains more than 26,000 loads and everything about reloading.&lt;/p&gt;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;/barnes-reloading-manual-4th-edition.html&quot;&gt;Barnes Reloading Manual 4th Edition&lt;/a&gt; &lt;/strong&gt;or&lt;strong&gt; &lt;a href=&quot;http://www.hodgdon.com/&quot;&gt;HODGDON Powder Co.&lt;/a&gt;&lt;/strong&gt; are also a good source for load data information.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.