Product Name Cleanup — Phase 4

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>The <strong>Classic Lee 45-70 Government Loader </strong>has a Bullet Diameter .457-459&quot;, 11.61-11.66mm. Overall length 2.550&quot;, 64.77mm. This kit has everything needed to reload 45-70 Government caliber, except a rubber mallet.</p><p>The <strong>Classic Lee 45-70 Government Loader </strong>has been chosen by more shooters for their first reloading tool than any other. Bullet Diameter .457-459&quot;, 11.61-11.66mm. Overall length 2.550&quot;, 64.77mm. It is all that is needed for good accurate ammunition. The 1873 Model Trap Door Springfield Rifle was the first to use this cartridge.</p><p>Use Load Data for your gun. Do not use the high pressure loads in old guns. This kit has everything needed to reload 45-70 Government caliber, except a rubber mallet.</p><h2><strong>Includes:</strong></h2><ul><li><strong>Decapping Chamber</strong></li><li><strong>Priming Chamber</strong></li><li><strong>Bullet Seater</strong></li><li><strong>Decapper</strong></li><li><strong>Sizing Die</strong></li><li><strong>Powder Dipper</strong></li><li><strong>Priming Rod</strong></li><li><strong>Instructions/Load Data</strong></li></ul><h2><strong>NOTES:</strong></h2><ul><li><strong>Rubber Mallet NOT included</strong></li><li><strong>The Classic Lee Loader neck sizes only. This is not recommended for semi-auto, pump and lever action guns.</strong></li></ul><h2><span style=&quot;color:#ffffff&quot;><span style=&quot;background-color:#ff0000&quot;> <strong> WARNING:</strong> </span></span> </h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul><li><strong>Always wear <strong><a href=&quot;/caldwell-pro-range-glasses-with-yellow-lens-621193086.html&quot;>safety glasses</a></strong> when reloading and shooting.</strong></li><li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li><li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li><li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li><li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul>

&lt;p&gt;This part has been discontinued by Lee Precision and is no longer available.&lt;/p&gt;&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .311 diameter, 93 grain, 1 ogive radius round nose bullets suitable for <strong>.32-20 Winchester Center Fire (WCF), .32 Smith & Wesson, .32 Colt New Police</strong> and similar cartridges. This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel.</p><p>Lee's second generation, match grade bullet molds feature trochoidal venting on the mold face and sprue plate mating surface which allows consistent and effortless fill out. <strong>Handles and hard anodized sprue plate are included.</strong></p><p><iframe width="400" height="225" frameborder="0" src="https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0" allowfullscreen=""></iframe></p><p> </p><h2><em style="line-height: 1.2em;"><span style="line-height: 1.2em;"> PURE LEAD SHOULD BE USED </span></em></h2><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Hard anodized sprue plate & handle</strong></li> <li><strong>Two Aluminum mold block halves</strong></li> <li><strong>Instructions</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">FEATURES:</span></span></h2><ul> <li><strong>Produces a bullet that fits </strong>.32-20 (WCF), .32 S&W, .32 Colt New Police </strong></li> <li><strong>Bullet diameter: </strong>.311 inches</strong></li> <li><strong>Bullet weight: </strong>93 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: </strong>.509 inches</strong></li> <li><strong>Distance from nose to first lube groove: </strong>.229 inches</strong></li> <li><strong>Bullet shape: </strong>1 ogive radius round nose</strong></li> <li><strong>Ballistic Coefficient: </strong>.125</strong></li> <li><strong>2 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are CNC machined from aluminum for exacting precision</strong>.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged & bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a></strong>.</strong></li> <li><strong>The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</strong></li> <li><strong>The <strong><a href="/lee-precision-melter-110-v.html">Lee Precision Melter 110 V</a></strong> is great for melting your metal. Heat control is simple & precise.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong>.</strong></li> <li><strong>Your best bullets are poured with the <strong><a href="/lee-precision-lead-ladle.html">Lee Lead Ladle</a></strong>.</strong></li> <li><strong>For Load Data information try <strong><a target="_blank" href="http://www.hodgdon.com/">HODGDON Powder Co</a></strong>.</strong></li> <li><strong>Use <strong><a href="/lee-precision-bullet-lube-and-size-kit-311.html">Lee Bullet lube and Size Kit .311</a></strong>.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Lead Information:</span></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 & 120.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads.</strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li></ul><p><strong><img style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" alt="" /><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses </a></strong>when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition wit

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This product has been discnotinued by Lee Precision and is no longer available. We will continue to stock repair parts as long as they are available from Lee Precision.</p><p><strong>Lee Precision Progressive 1000 Shell Plate Carrier #7 Complete </strong>is used to change calibers on the <a href=&quot;/lee-pro-1000&quot;>Progressive 1000 Press. </a>The carrier is attached to the Ram with a single socket head screw. This makes it very easy to change the entire carrier for caliber changing. Fits <strong>30-M1 Carbine and .32 Auto.</strong></p><p> </p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>INCLUDES:</span></h2><ul> <li><strong>Shell Plate</strong></li> <li><strong>Primer Feed </strong></li> <li><strong>Automatic Index</strong></li> <li><strong>Case Ejector</strong></li> <li><strong>Loaded Round Chute </strong></li> <li><strong>Case Feeder Adapter</strong></li> <li><strong>Spare Parts</strong></li> <li><strong>Case Sensor</strong></li></ul><p><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>WARNING:</strong>&amp;nbsp;</span> Use only CCI or Winchester brand primers. Other brands, especially Federal, can explode with sufficient force to seriously injure the user or persons nearby.</p>

<h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTE:</span></h2><ul> <li><strong>If you order shell plates to convert to another caliber, with a different primer size, you will need to order the <strong>Pro 1000 Primer Attachment</strong><br /> </strong></li></ul>. <!-- AKA_MPN --><p>This product is also known as <a href="/lee-precision-pro-shell-plate-7.html">90655</a></p><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTE:</span></h2><ul> <li><strong>If you order shell plates to convert to another caliber, with a different primer size, you will need to order the <strong><a href="/lee-precision-primer-attachment.html">Pro 1000 Primer Attachment</a></strong><br /> </strong></li></ul><!-- AKA_MPN --><p>This product is also known as 90655</p>

<p>This product has been discontinued by Lee Precision and is no longer available. We will continue to stock repair parts as long as they are available.</p><p>The <strong>Lee Precision Auto-Disk Powder Measure</strong> automatically dispenses charges more uniformly than any other powder measure. This powder measure is best used for charging handgun cases with a <a href=&quot;/lee-pistol-powder-thru-expanding-die&quot; style=&quot;background-color: rgb(255, 255, 255);&quot;><strong>Lee Precision Powder Through Expanding Die</strong></a>. The case itself actuates the measure as the neck is being flared during the presses maximum mechanical advantage. This assures the smooth, even action of the measure. A built-in baffle, and precisely molded, glass reinforced charge disks contribute to the unmatched charge uniformity. All four disks are inlcuded with the Auto-Disk Powder Measure.<br></p><p>If you want to use the Auto-Disk Powder Measure to charge powder on a <a href=&quot;/lee-precision-classic-turret-press.html&quot;><strong>Lee Precision Classic Turret Press</strong></a>, you will also need to order a <a href=&quot;/lee-precision-auto-disk-riser.html&quot;><strong>Lee Precision Auto Disk Riser</strong></a> which is sold separately. The riser raises the Auto Disk powder measure higher above the mounting location on the Turret Press to provide clearance for use of the <a href=&quot;/lee-precision-safety-primer-feed-large-and-small.html&quot;><strong>Lee Precision Safety Prime Feed Large and Small</strong></a>.<br> </p><h2><strong>Notes</strong></h2><ul><li><strong> If you are using the Auto-Disk Powder Measure on the Classic Turret Press, remember to also order the Auto-Disk Riser. The riser raises the Auto Disk powder measure higher above the mounting location on the Turret Press to provide clearance for use of the Safety Prime.</strong></li></ul><p><iframe frameborder=&quot;0&quot; height=&quot;225&quot; src=&quot;https://www.youtube-nocookie.com/embed/tE2zqh3BsjU?rel=0&quot; width=&quot;400&quot;></iframe></p><h2><strong>Includes:</strong> </h2><ul><li><strong>Auto Disk Powder Measure</strong></li><li><strong>24 Powder cavities in 4 charge disks</strong></li><li><strong>Disk A = .30 to .43 cc</strong></li><li><strong>Disk B = .46 to .66 cc</strong></li><li><strong>Disk C = .71 to 1.02 cc</strong></li><li><strong>Disk D = 1.09 to 1.57 cc</strong></li><li><strong>Instructions</strong></li></ul><h2><strong><strong>Features:</strong></strong></h2><ul><li><strong>Designed for handgun cases</strong></li><li><strong>Automatically charges the case through the expanding die</strong></li><li><strong>Most accurate pistol charging system made</strong></li></ul><h2><strong>warning:</strong></h2><ul><li><strong>Exercise EXTREME CAUTION to ensure you do not cycle the measure more than once on each case. If in doubt, remove the case and empty the powder into the hopper. Frequently look through the drop tube to confirm all powder has cleared.</strong></li><li><strong>Be sure you have the correct cavity for the powder, bullet &amp;amp; cartridge selected. The wrong one might give a dangerous charge, that could damage the gun and seriously injure the shooter.</strong></li><li><strong>Empty the hopper when not in use. Always return the unused powder to the original container for storage.</strong></li><li><strong>DO NOT use for black powder</strong></li></ul><p><strong><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></strong></p><ul><li><strong>DO NOT USE more powder than recommended</strong></li><li><strong>DO NOT USE a heavier bullet than recommended</strong></li><li><strong>DO NOT SEAT the bullet deeper than normal</strong></li><li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li><li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li><li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This part has been discontinued by Lee Precision and is no longer available.&lt;/p&gt;&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

&lt;p&gt;This part has been discontinued by Lee Precision and is no longer available.&lt;/p&gt;&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

<p><strong>Lee Precision PaceSetter 3-Die .260 Remington Set</strong> includes the exclusive <strong>Lee Factory Crimp die.</strong> It crimps the bullet in place more firmly than any other tool which prevent buckling of the case and makes for more accurate shooting. The die set also includes a <strong>Bullet Seating Die</strong> that works with almost any point style bullet. A simple finger adjustment is all that is needed to adjust the seating depth. If you are reloading for more than one firearm or reloading cases that were fired in other firearms the <strong>Full Length Sizer Die</strong> is a must. These dies are your best buy. They also include a shell holder, powder dipper, load data and are packed in a durable storage box. </p><div style="clear: both;"> </div><h2><span style="background-color:Yellow;"><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span><img alt="Lee precision factory crimp die cutaway" src="/image/catalog/userfiles/sizingdie.jpg" style="width: 89px; height: 275px; float: right; margin-left: 100px; margin-right: 100px;"></span></h2><ul> <li><strong>Full Length Sizer Die (image shown at right)</strong></li> <li><strong>Bullet Seating Die</strong></li> <li><strong>Factory Crimp Die</strong></li> <li><strong>Built In Stuck Case Remover</strong></li> <li><strong>EZ X Expander</strong></li> <li><strong>Shell Holder</strong></li> <li><strong>Powder Dipper</strong></li> <li><strong>Load Data</strong></li> <li><strong>Instructions</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>Notes:</strong></span></h2><ul> <li><strong>For further Load Data try <strong><a href="http://www.hodgdon.com/" target="_blank">HODGDON Powder Co.</a></strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses</a> when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li> <li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li> <li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul><p> </p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<h2>2018 model features new, low profile steel base with positive through ram primer dispsoal.</h2><p>The <strong>Lee Precision Value Turret Press with Auto Index</strong> has a Proven design with compound leverage. No spring in this turret design. The turret is locked into a solid steel ring with big rifle bolt type lugs. Patented design puts the lugs on the circumference so there can be no tipping. The linkage is so powerful that the largest magnum cases are sized with ease.<br></p><p>Effort required is so small that the usual heavy bench is not essential. The Lee Turret Press has built-in primer catcher, longer stroke, more hand clearance and a comfortable roller grip. Even if you do not need all of these features, why pay more for anything less? In fact, you will want a Lee Turret Press even if you already own a more expensive one.</p><p>The forth hole in the turret allows you to install your Lee Factory Crimp Die or taper crimp die in the press. When it is time to change calibers, simply lock in a new <a href="/lee-precision-4-hole-turret-1675160994.html"><strong>Lee Precision 4-Hole Turret</strong></a> with another set of dies and begin loading within seconds. </p><p>The auto index on the press is capable of loading cartridges with an overall length of 2.313" or less.</p><p>For loading longer cartridges, choose <a href="/lee-precision-classic-turret-press.html" target="_self"><strong>Lee's Classic Turret Press</strong></a> which has the auto index feature with a longer stroke that is capable of loading cartridges with an overall length of 3.313" or less. For both presses anything longer than the above specs, requires the turret to be manually advanced.</p><p><br></p><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Turret Press with Exclusive Lift Out & Change Turret</strong></li> <li><strong>Primer Arm for Large & Small Primers</strong></li> <li><strong>Lever Prime System</strong></li> <li><strong>Primer Catcher</strong></li> <li><strong>Auto Index</strong></li></ul><p><br></p><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Features:</span></h2><ul> <li><strong>Reloads Rifle & Pistol Ammunition</strong></li> <li><strong>Lift out convenience</strong></li> <li><strong>Hardwood Grip</strong></li> <li><strong>Two Year Guarantee</strong></li> <li><strong>Works with the <a href="/lee-precision-safety-primer-feed-large-and-small.html">Lee Safety Prime</a></strong></li></ul><p><br></p><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Note: </span></h2><ul> <li><strong>If you are using the Auto-Disk Powder Measure on this press, the <strong><a href="/lee-precision-auto-disk-riser.html">Auto Disk Riser </a></strong>will need to be purchased to provide adequate clearance for the Lee Safety Prime.</strong></li> <li><strong>For more Information & Instructions, click on "Man" Icon.</strong></li></ul><p><br></p><h2 style="font-family: "Open Sans", sans-serif; color: rgb(0, 0, 0);"><span style="background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;">Photo NOTE:</span></h2><ul><li><strong>The Lee Value Turret Press is shown mounted on the <a href="/lee-precision-bench-plate.html">Lee 90251 Bench Plate</a> which is sold separately.</strong></li></ul><p><br></p><h2> <em>IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul>

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p><p><br></p><h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;><span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;>notES:</span></h2><ul><li><strong>These index rods fit the Pre-2018 Lee 4-Hole Turret Press with tall red base.</strong></li><li><strong>This product has been discontinued by Lee Precision and is no longer available.</strong></li></ul>

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.&lt;/p&gt;

<p>The Lee Precision .300 Winchester Magnum Factory Crimp Die with standard 7/8" by 14 trheads is packaged in a custom fit plastic storage case with complete instructions.</p><p><strong><a href="/lee-precision-resizing-lubricant.html">Lubrication</a></strong> is required.</p><p><strong style="line-height: 1.6em;">Lee Precision Factory Crimp Dies</strong><span style="line-height: 1.6em;"> are the only effective way to crimp Bottle Neck Rifle Cartridges<strong>.</strong> This important step should be performed on all loads used for hunting. It crimps the bullet in place more firmly than any other tool. It is impossible to buckle the case, as with regular roll crimp dies. Trim length is not critical. Tests demonstrate that bullets which have no cannelure will shoot more accurately if crimped in place with the Lee Factory Crimp Die. </span></p><p><span style="line-height: 1.6em;">Factory ammo is often more accurate and able to withstand rough handling because the bullet is firmly crimped in place. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation. Even powder selection is less critical. </span></p><p><img alt="" src="/image/catalog/userfiles/riflefactorycrimp.jpg" style="width: .243 Winchesterpx; height: 323px; float: right; margin-left: 10px; margin-right: 10px;" /></p><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul><li><strong>Caliper appropriate Hardened Steel Factory Crimp Die</strong></li><li><strong>Plastic storage case</strong></li><li><strong>Instructions</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FEATURES:</strong></span></h2><ul><li><strong>Crimps bullets in place more firmly with uniform pressure</strong></li><li><strong>Adjusting screw to set the amount of crimp desired</strong></li><li><strong>Produces more consistent and dependable ammo</strong></li><li><strong>Eliminated magnum powder ignition problems</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul><li><strong><a href="/lee-precision-resizing-lubricant.html">Lubrication </a></strong>required</strong></li><li><strong>Will work with 22-K cases</strong></li><li><strong>Trim length not critical</strong></li><li><strong>Better accuracy with factory crimped ammo</strong></li><li><strong>Fits Presses with standard 7/8"-14 threads</strong></li><li><strong><a href="/press-shell-holders">Shell holder sold separately</a></strong></li><li><strong>Factory Crimp Die is included in the Lee Pacesetter 3-Die Sets</strong></li></ul><p> </p>

&lt;p&gt;The original paper instruction sheet included with Lee Factor Crimp Dies as supplied by Lee Precision. A digital version in PDF format is available for free download from our &lt;a href=&quot;/index.php?route=product/manual&quot;&gt;&lt;strong&gt;Product Manuals page&lt;/strong&gt;&lt;/a&gt;.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This kit includes the Lee 4 Hole Turret Press which features a proven design that utilizes turrets locked into a solid steel ring to make changing calibers quick and easy. The powerful linkage allows even the largest magnum cases to be sized with minimal effort. The kit also includes a Lee Auto Drum Powder Measure, Lee Safety Scale, Lee Primer Pocket Cleaner, Cutter &amp; Lock Stud and Chamfer Tool.</p><p>With the<strong> Lee Precision Deluxe 4-Hole Turret Press Kit </strong>you can produce a finished round with just four pulls of the lever. With a little experience, most reloaders find they can load over 200 rounds per hour using the 4-Hole Turret Press. Order a set of <a href=&quot;/lee-pistol-reloading-dies&quot;><strong>Pistol Dies</strong></a> or <a href=&quot;/lee-rifle-reloading-dies&quot;><strong>Rifle Dies</strong></a> and a Case Length Gauge for your caliber to complete the kit. The press is large enough to handle even monster belted magnum rifle cases.</p><p>When it is time to change calibers, simply lock in a new <a href=&quot;/lee-precision-4-hole-turret-1675160994.html&quot;><strong>Lee Precision 4 Hole Turret Turret</strong></a> with another set of dies and begin loading within seconds. The auto index on the press is capable of loading cartridges with an overall length of 2.3125&quot; or less.</p><p>For loading longer cartridges, choose <a href=&quot;/lee-precision-classic-turret-press-kit.html&quot; target=&quot;_self&quot;><strong>Lee's Classic Turret Press Kit</strong></a> which has the auto index feature with a longer stroke that is capable of loading cartridges with an overall length of 3.313&quot; or less. For both presses anything longer than the above specs, requires the turret to be manually advanced.</p><p><br></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>INCLUDES:</span></h2><ul> <li><strong><a href=&quot;/lee-precision-4-hole-turret-press-with-auto-index.html&quot;><strong>Lee Precision 4 Hole Turret Turret Press with Auto Index</strong></a></strong></li> <li><strong><a href=&quot;https://fsreloading.com/lee-precision-auto-drum-powder-measure.html&quot;><strong>Lee Precision Auto Drum Powder Measure</strong></a></strong></li> <li><strong><a href=&quot;/lee-precision-lee-safety-scale-red.html&quot;><strong>Lee Precision Safety Scale Red</strong></a></strong></li> <li><strong><a href=&quot;/lee-precision-primer-pocket-cleaner.html&quot;><strong>Lee Precision Primer Pocket Cleaner</strong></a>, cleans both large and small primer pockets</strong></li> <li><strong><a href=&quot;/lee-precision-cutter-and-lock-stud.html&quot;><strong>Lee Precision Cutter &amp; Lock Stud</strong></a>, for trimming your cases</strong></li> <li><strong><a href=&quot;/lee-precision-chamfer-tool.html&quot;><strong>Lee Precision Chamfer Tool</strong></a>, deburrs cases after trimming</strong></li> <li><strong>Instructions</strong></li></ul><p><br></p><h2 style=&quot;font-family: &quot;Open Sans&quot;, sans-serif; color: rgb(0, 0, 0);&quot;><span style=&quot;background-color: rgb(255, 255, 0); font-weight: bold; padding: 3px 7px; text-transform: uppercase;&quot;>photo note:</span></h2><ul><li><strong>The Lee Turret Press is shown mounted to a Lee Bench Plate which is not included.</strong></li></ul><p><br></p><h2><span style=&quot;line-height: 1.2em;&quot;> <em><strong> </strong></em></span><em style=&quot;line-height: 1.2em;&quot;><strong><em style=&quot;line-height: 1.2em;&quot;><strong style=&quot;line-height: 1.2em;&quot;><em style=&quot;line-height: 1.2em;&quot;>IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></em></strong></em></h2><p><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href=&quot;/caldwell-pro-range-glasses-with-yellow-lens-621193086.html&quot;>safety glasses</a></strong> when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li> <li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li> <li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul>

&lt;p&gt;The &lt;strong&gt;Lee Precision .338 Winchester Magnum Quick Trim Rifle Die&lt;/strong&gt;&amp;nbsp;is used in conjunction with the&amp;nbsp;&lt;strong&gt;Lee Precision Deluxe Quick Trim Case Trimmer&lt;/strong&gt;&amp;nbsp;or the&amp;nbsp;&lt;strong&gt;Lee Precision Value Trim Case Trimmer&lt;/strong&gt;.&lt;/p&gt;&lt;p&gt;When installed in a press like the&amp;nbsp;&lt;strong&gt;Lee Precision Breech Lock Challenger press&lt;/strong&gt;, it holds the trimmer in precise alignment with the case so no calipers, measurement or trial and error adjustment is required to precisely trim your cases.&lt;/p&gt;&lt;h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;strong&gt;&lt;b style=&quot;background-color: rgb(255, 255, 0); padding: 3px 7px; text-transform: uppercase;&quot;&gt;FEATURES:&lt;/b&gt;&lt;/strong&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Holds trimmer in precise alignment with the case.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;No measurement or trial and error required.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Quick and easy.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

<p>The <strong>Lee Precision .451 Lube &amp; Sizing Kit </strong>is the fastest and easiest way to lubricate and size cast bullets. The Sizing Die has Standard 7/8x14 threads which are compatible with most brands of Single Stage Presses. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are dropped into a container.</p><p>The Lee Precision Lube &amp; Sizing kit is Intended for use on Single Stage Presses ONLY. Lee recommends bullets be relubed after sizing to be sure the sized portion is coated with Alox. All lead bullets MUST be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. </p><div style=&quot;clear: both;&quot;> </div><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Includes:</span></h2><ul><li><strong>Steel sizing Die</strong></li><li><strong>Sizer Punch</strong></li><li><strong>Sturdy plastic container</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>features:</strong></span></h2><ul><li><strong>Standard 7/8 x 14 threads are compatible with most brands of Single Stage Presses.</strong></li><li><strong>Bullets are pushed through the sizing die nose first, no special nose punches are needed.</strong></li><li><strong>Gas checks are automatically seated and crimped in place.</strong></li><li><strong>Sized bullets are captured in the special container.</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>NOTES:</strong></span></h2><ul><li><strong>The Lee Precision Lube &amp; Sizing kit is Intended for use on Single Stage Presses ONLY. The push through Punch is used in place of a Shell Holder in the Ram. </strong></li><li><strong>Lee recommends bullets be relubed after sizing to be sure the sized portion is coated with <a href=&quot;/lee-precision-liquid-alox.html&quot;>Alox.</a> All lead bullets MUST be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.</strong></li></ul><h2><strong><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Lubricating bullets:</span></strong></h2><ul><li><strong>Place bullets in provided red plastic container and drop in <a href=&quot;/lee-precision-liquid-alox.html&quot;>Lee Liquid Alox</a> onto the bullets. Gently shake the bullets in an orbital motion to coat the bullets. If they do not coat completely, add a little more lube. Spread the bullets onto waxed paper and let dry overnight. Load at least one bullet into a case and check to be sure it easily chambers in the gun. If it fits tightly, you must resize the bullet before loading.</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>sizing bullets:</strong></span></h2><ul><li><strong><p>Screw the sizing die into any standard reloading press. Exact depth is not important. Install the bullet punch into the ram. This fits all rams that use standard shellholders. Place the red plastic container with the lubed bullets inside, on top of the sizing die. Place bullet on the punch and push the bullet through the die. When 3/4 of the bullets have been loaded, lift the red plastic container off the die. Invert the holder before opening. For rifle and hot pistol loads, it is best to relube the bullets to ensure the sized portion is recoated.</p></strong></li></ul><h2> </h2>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>The <strong>Lee Precision .41 Remington Magnum Powder Through Expanding Die</strong> has an expanded and flared case neck with a hollow plug. This allows simultaneous charging with Auto-Disk Powder Measure or Dipper. The Powder Funnel adapter can be replaced with a <a href="/lee-precision-auto-disk-powder-measure.html">Lee Auto-Disk Powder Measure</a> for fully automatic powder charging while the case mouth is being expanded. Shell holder sold separately. Every<strong> </strong>Lee 3-Die Set includes a Powder Through Expanding Die at no extra cost.</p><div style="clear: both;"> </div><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Powder through Expanding Die (shown in image at right)<img alt="Lee Precision Powder through die cutaway" src="/image/catalog/userfiles/powderthrough.jpg" style="width: 189px; height: 300px; float: right; margin-left: 10px; margin-right: 10px;" /></strong></li> <li><strong>Storage Case</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Features:</span></h2><p><strong>The Powder Funnel adapter can be replaced with a <a href="/lee-precision-auto-disk-powder-measure.html">Lee Auto-Disk Powder Measure</a> for fully automatic powder charging while the case mouth is being expanded. </strong></p><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Notes:</span></h2><p>Shell holder sold separately</p><p> </p>

<h2 style="font-family: "Open Sans", sans-serif; color: rgb(0, 0, 0);">Six Cavity Commercial Quality Molds</h2><p>Made for heavy duty volume production, this <strong>Lee Precision Six Cavity Bullet Mold</strong> produces .401 diameter, 175 grain Semi Wad Cutter nose bullets suitable for .<strong>40 S&W (Smith & Wesson), 10mm</strong> and similar cartridges. This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, this Lee mold is easier to use, causes less operator fatigue during casting and can produce more consistent bullets than other molds made from iron or steel. Lee's 6 cavity mold blocks are machined from aluminum and assembled with steel bushings and alignment pins for lasting precision.</p><p>A sprue plate is included but <strong><a href="/lee-precision-commercial-mold-handles.html">Handles</a></strong> are sold separately. The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><p><iframe width="400" height="225" frameborder="0" src="https://www.youtube-nocookie.com/embed/L8xKC7gbGTI?rel=0" allowfullscreen=""></iframe></p><h2><br></h2><div style="clear: both;"> </div><h2 style="clear: both;"><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">Includes:</span></h2><ul> <li style="clear: both;"><strong>(2) aluminum Mold Block halves (mold handles NOT included)</strong></li> <li style="clear: both;"><strong>Hard anodized Sprue Plate with handle</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">FEATURES:</span></span></h2><ul> <li><strong>Produces bullets that fit 40 S&W, 10mm and similar sized cartridges.</strong></li> <li><strong>Bullet diameter: .401 inches</strong></li> <li><strong>Bullet weight: 175 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: N/A</strong></li> <li><strong>Distance from nose to first lube groove: N/A</strong></li> <li><strong>Bullet shape: Semi Wad Cutter </strong></li> <li><strong>Ballistic Coefficient: N/A</strong></li> <li><strong>6 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are machined from aluminum</strong>.</strong></li> <li><strong>Assembled with steel bushings and alignment pins for lasting precision.</strong></li> <li><strong>Cam operated sprue plate to eliminate the pounding common to ordinary molds.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged & bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href="/lee-precision-melter-110-v.html"> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple & your best bullets are poured with the <strong><a href="/lee-precision-lead-ladle.html">Lee Ladle</a></strong>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a target="_blank" href="http://www.hodgdon.com/">HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 & 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" alt=""><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses</a></strong> when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict pa

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This part has been discontinued by Lee Precision and is no longer available. It has been replaced by Lee Precision 90512 - 1/4-12 BL Update Kit.&lt;/p&gt;&lt;p&gt;The Lee Die Adapter Hex Bushing allows standard 7/8&quot; -14 threaded dies to be used in large series presses with 1 1/4&quot;-12 threads.&lt;/p&gt;&lt;p&gt;&lt;br&gt;&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision. &lt;/p&gt;&lt;p&gt;The Lee BP3020 Ram is machined specially for each press and is not available separately.&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p>