Product Name Cleanup — Phase 4

<p>The Ambidextrous Magazine Release replicates the feel and length of a standard magazine release button but also accommodates left-handed shooters and one-handed magazine changes. This magazine release is constructed of rugged machined billet tool steel. Patent pending. Available in Black. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Billet Tool Steel</strong></li><li><strong>Ambidextrous</strong></li><li><strong>Magazine Release </strong></li></ul>

<p>When the Troy Team set out to create the PRM Scope Mount Assembly the objective was simple. They were going to design engineer and manufacture the finest available mounting platform in the world. Their primary considerations were precision tolerances ruggedness snag free lightest weight without compromising performance and repeatability. The scope mount starts as 6 pounds of aluminum and fully machine the exterior profile of the mount. The mount is then fixtured in the EDM for a perfect 0 tolerance bore through the rings (which are serial numbered to match the base) and perfect M1913 dove tail dimensioning centering the scope bore perfectly above the rail at 1.5. In the same EDM process the ring caps are sliced off the rings creating a perfect interface and even clamping of the scope. The entrance and exit of each ring is precision chamfered to prevent ring bite on the scope tube. The rings have threaded Stainless Steel inserts from beneath to receive the ring cap screws. The hardware for the scope mount assembly is fully machined from precision ground stainless steel. The mount features four recoil lugs to include the flat precision machined cross bolts. The bolts are inserted and press fit from right to left. The 1/2 nuts that retain the clamps are engineered to pull against the full body of the clamp via the shoulder with only half of the protrusion of a normal scope ring nut without sacrificing thread count. This was also engineered to be low profile and snag free. Due to the low-profile clamping nuts there is no interference with ejection of spent cartridges. The cross bolts are peened to prevent accidental loss of the retention nuts. The scope mount is clearly marked with torque setting and identifier of mount size MOA slant and serial number. The 30mm Mount comes in under 7 ounces. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight</strong></li><li><strong>Precision-machined aluminum</strong></li><li><strong>Black, 30MM Rings </strong></li></ul>

<p>When the Troy Team set out to create the PRM Scope Mount Assembly the objective was simple. They were going to design engineer and manufacture the finest available mounting platform in the world. Their primary considerations were precision tolerances ruggedness snag free lightest weight without compromising performance and repeatability. The scope mount starts as 6 pounds of aluminum and fully machine the exterior profile of the mount. The mount is then fixtured in the EDM for a perfect 0 tolerance bore through the rings (which are serial numbered to match the base) and perfect M1913 dove tail dimensioning centering the scope bore perfectly above the rail at 1.5. In the same EDM process the ring caps are sliced off the rings creating a perfect interface and even clamping of the scope. The entrance and exit of each ring is precision chamfered to prevent ring bite on the scope tube. The rings have threaded Stainless Steel inserts from beneath to receive the ring cap screws. The hardware for the scope mount assembly is fully machined from precision ground stainless steel. The mount features four recoil lugs to include the flat precision machined cross bolts. The bolts are inserted and press fit from right to left. The 1/2 nuts that retain the clamps are engineered to pull against the full body of the clamp via the shoulder with only half of the protrusion of a normal scope ring nut without sacrificing thread count. This was also engineered to be low profile and snag free. Due to the low-profile clamping nuts there is no interference with ejection of spent cartridges. The cross bolts are peened to prevent accidental loss of the retention nuts. The scope mount is clearly marked with torque setting and identifier of mount size MOA slant and serial number. The 30mm Mount comes in under 7 ounces. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight</strong></li><li><strong>Precision-machined aluminum</strong></li><li><strong>Flat Dark Earth, 30MM Rings </strong></li></ul>

<p>When the Troy Team set out to create the PRM Scope Mount Assembly the objective was simple. They were going to design engineer and manufacture the finest available mounting platform in the world. Their primary considerations were precision tolerances ruggedness snag free lightest weight without compromising performance and repeatability. The scope mount starts as 6 pounds of aluminum and fully machine the exterior profile of the mount. The mount is then fixtured in the EDM for a perfect 0 tolerance bore through the rings (which are serial numbered to match the base) and perfect M1913 dove tail dimensioning centering the scope bore perfectly above the rail at 1.5. In the same EDM process the ring caps are sliced off the rings creating a perfect interface and even clamping of the scope. The entrance and exit of each ring is precision chamfered to prevent ring bite on the scope tube. The rings have threaded Stainless Steel inserts from beneath to receive the ring cap screws. The hardware for the scope mount assembly is fully machined from precision ground stainless steel. The mount features four recoil lugs to include the flat precision machined cross bolts. The bolts are inserted and press fit from right to left. The 1/2 nuts that retain the clamps are engineered to pull against the full body of the clamp via the shoulder with only half of the protrusion of a normal scope ring nut without sacrificing thread count. This was also engineered to be low profile and snag free. Due to the low-profile clamping nuts there is no interference with ejection of spent cartridges. The cross bolts are peened to prevent accidental loss of the retention nuts. The scope mount is clearly marked with torque setting and identifier of mount size MOA slant and serial number. The 30mm Mount comes in under 7 ounces. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight</strong></li><li><strong>Precision-machined aluminum</strong></li><li><strong>Black, 34MM Rings </strong></li></ul>

<p>When the Troy Team set out to create the PRM Scope Mount Assembly the objective was simple. They were going to design engineer and manufacture the finest available mounting platform in the world. Their primary considerations were precision tolerances ruggedness snag free lightest weight without compromising performance and repeatability. The scope mount starts as 6 pounds of aluminum and fully machine the exterior profile of the mount. The mount is then fixtured in the EDM for a perfect 0 tolerance bore through the rings (which are serial numbered to match the base) and perfect M1913 dove tail dimensioning centering the scope bore perfectly above the rail at 1.5. In the same EDM process the ring caps are sliced off the rings creating a perfect interface and even clamping of the scope. The entrance and exit of each ring is precision chamfered to prevent ring bite on the scope tube. The rings have threaded Stainless Steel inserts from beneath to receive the ring cap screws. The hardware for the scope mount assembly is fully machined from precision ground stainless steel. The mount features four recoil lugs to include the flat precision machined cross bolts. The bolts are inserted and press fit from right to left. The 1/2 nuts that retain the clamps are engineered to pull against the full body of the clamp via the shoulder with only half of the protrusion of a normal scope ring nut without sacrificing thread count. This was also engineered to be low profile and snag free. Due to the low-profile clamping nuts there is no interference with ejection of spent cartridges. The cross bolts are peened to prevent accidental loss of the retention nuts. The scope mount is clearly marked with torque setting and identifier of mount size MOA slant and serial number. The 30mm Mount comes in under 7 ounces. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight</strong></li><li><strong>Precision-machined aluminum</strong></li><li><strong>Flat Dark Earth, 34MM Rings </strong></li></ul>

<p>When the Troy Team set out to create the PRM Scope Mount Assembly the objective was simple. They were going to design engineer and manufacture the finest available mounting platform in the world. Their primary considerations were precision tolerances ruggedness snag free lightest weight without compromising performance and repeatability. The scope mount starts as 6 pounds of aluminum and fully machine the exterior profile of the mount. The mount is then fixtured in the EDM for a perfect 0 tolerance bore through the rings (which are serial numbered to match the base) and perfect M1913 dove tail dimensioning centering the scope bore perfectly above the rail at 1.5. In the same EDM process the ring caps are sliced off the rings creating a perfect interface and even clamping of the scope. The entrance and exit of each ring is precision chamfered to prevent ring bite on the scope tube. The rings have threaded Stainless Steel inserts from beneath to receive the ring cap screws. The hardware for the scope mount assembly is fully machined from precision ground stainless steel. The mount features four recoil lugs to include the flat precision machined cross bolts. The bolts are inserted and press fit from right to left. The 1/2 nuts that retain the clamps are engineered to pull against the full body of the clamp via the shoulder with only half of the protrusion of a normal scope ring nut without sacrificing thread count. This was also engineered to be low profile and snag free. Due to the low-profile clamping nuts there is no interference with ejection of spent cartridges. The cross bolts are peened to prevent accidental loss of the retention nuts. The scope mount is clearly marked with torque setting and identifier of mount size MOA slant and serial number. The 30mm Mount comes in under 7 ounces. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight</strong></li><li><strong>Precision-machined aluminum</strong></li><li><strong>Black, 35MM Rings </strong></li></ul>

<p>When the Troy Team set out to create the PRM Scope Mount Assembly the objective was simple. They were going to design engineer and manufacture the finest available mounting platform in the world. Their primary considerations were precision tolerances ruggedness snag free lightest weight without compromising performance and repeatability. The scope mount starts as 6 pounds of aluminum and fully machine the exterior profile of the mount. The mount is then fixtured in the EDM for a perfect 0 tolerance bore through the rings (which are serial numbered to match the base) and perfect M1913 dove tail dimensioning centering the scope bore perfectly above the rail at 1.5. In the same EDM process the ring caps are sliced off the rings creating a perfect interface and even clamping of the scope. The entrance and exit of each ring is precision chamfered to prevent ring bite on the scope tube. The rings have threaded Stainless Steel inserts from beneath to receive the ring cap screws. The hardware for the scope mount assembly is fully machined from precision ground stainless steel. The mount features four recoil lugs to include the flat precision machined cross bolts. The bolts are inserted and press fit from right to left. The 1/2 nuts that retain the clamps are engineered to pull against the full body of the clamp via the shoulder with only half of the protrusion of a normal scope ring nut without sacrificing thread count. This was also engineered to be low profile and snag free. Due to the low-profile clamping nuts there is no interference with ejection of spent cartridges. The cross bolts are peened to prevent accidental loss of the retention nuts. The scope mount is clearly marked with torque setting and identifier of mount size MOA slant and serial number. The 30mm Mount comes in under 7 ounces. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight</strong></li><li><strong>Precision-machined aluminum</strong></li><li><strong>Flat Dark Earth, 35MM Rings </strong></li></ul>

<p>Building off of the patented TRX Extreme design that revolutionized rail-based handguards the Alpha Rail utilizes a new low-profile locking mechanism and affords unparalleled strength and stability. Comes with two 2 and one 4.2detachable rails and all mounting hardware but the barrel nut is not included. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Black finish</strong></li><li><strong>11 Alpha BattleRail</strong></li><li><strong>Free floating</strong></li><li><strong>Low profile</strong></li><li><strong>Machined from hardened aircraft aluminum with stainless steel components </strong></li></ul>

<p>Building off of the patented TRX Extreme design that revolutionized rail-based handguards the Alpha Rail utilizes a new low-profile locking mechanism and affords unparalleled strength and stability. Comes with two 2 and one 4.2detachable rails and all mounting hardware but the barrel nut is not included. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Black finish</strong></li><li><strong>9 Alpha BattleRail</strong></li><li><strong>Free floating</strong></li><li><strong>Low profile</strong></li><li><strong>Machined from hardened aircraft aluminum with stainless steel components </strong></li></ul>

<p>Troy Industries AR-15 A3 Upper Receivers are lightweight and ultra-low profile. Developed specifically for today's war fighter and Law Enforcement led by Special Operations field requirements. The M-Lok Battlerail handguard is machined from hardened aircraft aluminum with stainless steel components and finished in MIL-SPEC hardcoat anodizing the M-LOK rails are light and sleek. The M-LOK slots make for mounting your favorite M-LOK accessories quick and easy. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight design</strong></li><li><strong>M-LOK compatible</strong></li><li><strong>Sleek ergonomic profile </strong></li></ul>

<p>Troy Industries AR-15 A3 Upper Receivers are lightweight and ultra-low profile. Developed specifically for today's war fighter and Law Enforcement led by Special Operations field requirements. The M-Lok Battlerail handguard is machined from hardened aircraft aluminum with stainless steel components and finished in MIL-SPEC hardcoat anodizing the M-LOK rails are light and sleek. The M-LOK slots make for mounting your favorite M-LOK accessories quick and easy. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight design</strong></li><li><strong>M-LOK compatible</strong></li><li><strong>Sleek ergonomic profile </strong></li></ul>

<p>Troy Industries AR-15 A4 Upper Receivers are lightweight and ultra-low profile. Developed specifically for today's war fighter and Law Enforcement led by Special Operations field requirements. The M-Lok SOCC handguard is lightweight with an ultra-low profile snag-free design they are ideal for close quarters maneuverability. Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hardcoat anodizing. The M-LOK slots make for mounting your favorite M-LOK accessories quick and easy. The Troy Industries folding Battle Sights feature push-button operation and tool-less adjustment. Constructed of aircraft aluminum with stainless hardware. Battle Sights feature a zero cant mounting system ensuring perfect sight alignment. Sight mounts to the receiver with a cross bolt. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight design</strong></li><li><strong>M-LOK compatible</strong></li><li><strong>Sleek ergonomic profile </strong></li></ul>

<p>Troy Industries AR-15 A4 Upper Receivers are lightweight and ultra-low profile. Developed specifically for today's war fighter and Law Enforcement led by Special Operations field requirements. The M-Lok SOCC handguard is lightweight with an ultra-low profile snag-free design they are ideal for close quarters maneuverability. Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hardcoat anodizing. The M-LOK slots make for mounting your favorite M-LOK accessories quick and easy. The Troy Industries folding Battle Sights feature push-button operation and tool-less adjustment. Constructed of aircraft aluminum with stainless hardware. Battle Sights feature a zero cant mounting system ensuring perfect sight alignment. Sight mounts to the receiver with a cross bolt. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Lightweight design</strong></li><li><strong>M-LOK compatible</strong></li><li><strong>Sleek ergonomic profile </strong></li></ul>

<p>The X-Ring 10/22(R) Compensators are a simple addition to spruce up any 1/2x28 .22LR pistol or rifle. With 360 degree ports Tactical Solutions compensators help reduce muzzle rise on your barrel. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>1/2X28 thread pitch</strong></li><li><strong>Made for Ruger 10/23 </strong></li></ul>

<p>The X-Ring 10/22(R) Compensators are a simple addition to spruce up any 1/2x28 .22LR pistol or rifle. With 360 degree ports Tactical Solutions compensators help reduce muzzle rise on your barrel. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>1/2X28 thread pitch</strong></li><li><strong>Made for Ruger 10/24 </strong></li></ul>

<p>THE NEW X-RING OPEN SIGHT .22LR BARRELS ARE MACHINED FROM 6061-T6 ALUMINUM THE PREMIUM X-RING BARREL HAS BEEN DESIGNED TO MAKE YOUR RUGER(R) 10/22(R) RIFLE LIGHTER AND SIGNIFICANTLY MORE ACCURATE. THE X-RING BARREL FITS ALL RUGER 10/22 RECEIVERS AND MOST AFTERMARKET 10/22 STYLE RECEIVERS. ACCURACY IS ENHANCED BY A RIFLED CHROMOLY STEEL LINER WITH A POLISHED 11 DEGREE CROWN. THE X-RING OPEN SIGHT BARREL COMES WITH AN ADJUSTABLE GREEN FIBER OPTIC REAR SIGHT AND GREEN FIBER OPTIC FRONT SIGHT. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Fiber optic sights</strong></li><li><strong>1/2X28 thread pitch</strong></li><li><strong>1:16 rifling </strong></li></ul>

<p>X-Ring .22LR barrels are the highly accurate premium rimfire replacement bull barrels for the Ruger(R) 10/22 Takedown(R). The TacSol X- Ring Takedown barrels perfectly fit the .920 diameter Magpul(R) and Hogue(R) Takedown stocks. These barrels come fully assembled with the standard Ruger(R) 10/22 Takedown(R) locking mechanism making the switch from the factory barrel a simple and easy. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>16oz weight</strong></li><li><strong>1/2X28 thread pitch</strong></li><li><strong>1:16 rifling </strong></li></ul>

<p>Machined from 6061-T6 aluminum the X-RING.22LR premium barrel upgrade has been designed to make your Ruger(R) 10/22 rifle lighter and significantly more accurate. The X-Ring barrel fits all Ruger 10/22 receivers and most aftermarket 10/22 style receivers. Accuracy is enhanced by a chromoly steel liner and a 11 degree target crown. The threaded muzzle allows for an easy addition of a TacSol suppressor or compensator. With plenty of color options you will have no issues finding a barrel to match your custom rifle. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>15oz weight</strong></li><li><strong>1/2X28 thread pitch</strong></li><li><strong>1:16 rifling </strong></li></ul>

<p>Machined from 6061-T6 aluminum the X-RING.22LR premium barrel upgrade has been designed to make your Ruger(R) 10/22 rifle lighter and significantly more accurate. The X-Ring barrel fits all Ruger 10/22 receivers and most aftermarket 10/22 style receivers. Accuracy is enhanced by a chromoly steel liner and a 11 degree target crown. The threaded muzzle allows for an easy addition of a TacSol suppressor or compensator. With plenty of color options you will have no issues finding a barrel to match your custom rifle. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>15oz weight</strong></li><li><strong>1/2X28 thread pitch</strong></li><li><strong>1:16 rifling </strong></li></ul>

<p>The Tactical Solutions Inert Suppressor has no sound reduction which means no paperwork giving you the look of a suppressor without the hassle of paperwork. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>6061 Aluminum construction</strong></li><li><strong>5.2 length </strong></li></ul>

<p>The Pac-Lite(R) Compensators are a simple addition to spruce up any 1/2x28 .22LR pistol or rifle. With 360 degree ports Tactical Solutions compensators help reduce muzzle rise on your barrel. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>1/2X28 thread pitch</strong></li><li><strong>Helps reduce muzzle rise </strong></li></ul>

<p>The SB-X .22 LR barrel is compact and lightweight</p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>12oz weight</strong></li><li><strong>1/2X28 thread pitch</strong></li><li><strong>1:16 rifling</strong></li><li><strong>Includes inert display suppressor and locking mechanism </strong></li></ul>

<p>THE TRAIL-LITE HAS MANY OF THE SAME GREAT FEATURES AS Tactical Solutions' PAC-LITE BARRELS IT OFFERS THE BUCK MARK(R) PISTOL IMPROVED BALANCE ACCURACY AND A LIGHTER WEIGHT. AS WITH ALL TACTICAL SOLUTIONS PRODUCTS INSTALLATION OF THE TRAIL-LITE BARREL ON YOUR EXISTING BUCK MARK FRAME IS QUICK AND EASY AND REQUIRES NO GUNSMITHING. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>1/2X28 thread pitch</strong></li><li><strong>1:16 rifling </strong></li></ul>

<p>THE TRAIL-LITE HAS MANY OF THE SAME GREAT FEATURES AS Tactical Solutions' PAC-LITE BARRELS IT OFFERS THE BUCK MARK(R) PISTOL IMPROVED BALANCE ACCURACY AND A LIGHTER WEIGHT. AS WITH ALL TACTICAL SOLUTIONS PRODUCTS INSTALLATION OF THE TRAIL-LITE BARREL ON YOUR EXISTING BUCK MARK FRAME IS QUICK AND EASY AND REQUIRES NO GUNSMITHING. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>1/2X28 thread pitch</strong></li><li><strong>1:16 rifling </strong></li></ul>

<p>The Trail-Lite(R) Compensators are a simple addition to spruce up any 1/2x28 .22LR pistol or rifle. With 360 degree ports Tactical Solutions' compensators help reduce muzzle rise on your barrel. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>.900 diameter</strong></li><li><strong>1/2X28 threads </strong></li></ul>

<p>Replace your factory V-Block with this durable Stainless Steel Performance V-Block. Created to eliminate barrel droop. Fits your Ruger 10/22 and most after market receivers with absolutely no gunsmithing required. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Stainless Steel</strong></li><li><strong>Eliminates Barrel Droop</strong></li><li><strong>Easy Installation </strong></li></ul>

<p>High quality components and precise manufacturing make Tactical Solutions parts ideal for maintaining and upgrading firearms. The durability reliability and excellent build quality of these parts will ensure years of service you can count on. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Precise Manufacturing</strong></li><li><strong>Long Term Reliability</strong></li><li><strong>Durable Construction </strong></li></ul>

<p>The durability reliability and excellent build quality of Uncle Mike's sling swivels will provide years of service you can count on. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Quick Detach</strong></li><li><strong>Sling Swivels </strong></li></ul>

<p>Uncle Mike's pioneered the modern swivel in 1947 and has continued to make the strongest, most reliable swivels on the market. Any other brand is a weak link between you and your firearm. Demand the original. Uncle Mike's Swivels.<br></p><p>The durability reliability and excellent build quality of Uncle Mike's sling swivels will provide years of service you can count on. </p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>1&quot; Tactical Swivel</strong></li><li><strong>Push-Button</strong></li><li><strong>Fits most bolt action rifles</strong></li></ul>

<p>Remington 7400 and Four autoloaders sling swivels made by Uncle Mike's. Special fore-end adapter bolt swivel base. Wood screw base for stock. </p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>Includes wood screw</strong></li><li><strong><li><strong>Fits Remington 7400 and Remington Model 4 Autoloaders</strong></li><li><strong>1&quot; Swivels</strong></li> </strong></li></ul>

<p>1 inch sling swivels made by Uncle Mike's.</p><p>Uncle Mike's pioneered the modern swivel in 1947 and has continued to make the strongest, most reliable swivels on the market. Any other brand is a weak link between you and your firearm. Demand the original. Uncle Mike's Swivels.</p><p><br></p><p> </p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>1/2 deep-threaded wood screw and fore-end base</strong></li><li><strong>Includes 2 Super Swivels, 2 wood screws, 2 spacers</strong></li></ul>

<p>Uncle Mike's pioneered the modern swivel in 1947 and has continued to make the strongest, most reliable swivels on the market. Any other brand is a weak link between you and your firearm. Demand the original. Uncle Mike's Swivels.</p><p>The durability reliability and excellent build quality of Uncle Mike's sling swivels will provide years of service you can count on.<br></p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>1.25 inch deep-threaded wood screw and fore-end base</strong></li><li><strong>Fits 1.25 inch slings</strong></li><li><strong>Fits most bolt action rifles with fore end wood at least 5/8&quot; deep</strong></li></ul>

&lt;p&gt;Milspec sling swivels made by Uncle Mike's.&amp;nbsp;These QD Sling Swivels are designed to put all guns that come factory equipped with swivel bases installed. You may also use these swivels on guns that have non-detachable swivels.&lt;/p&gt;&lt;p&gt;&lt;/p&gt;&lt;h2&gt;&lt;span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;&gt;FEATURES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Super-heavy-duty, made to military specifications&lt;br&gt;&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Dependable under the most demanding conditions&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;b&gt;Grey steel with black thumb screws&lt;/b&gt;&lt;br&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Set of two 1 1/4&quot; swivels&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

<p>Quick Detachable super sling swivel with Tri-lock made by Uncle Mike's.</p><p>The QD Super Swivels with Tri-Lock from Uncle Mike's are the super strong swivels you expect from Uncle Mike's with the extra security against accidental opening. The QD Super Swivels offer flawless fit and silent operation that make them ideal for hunting rifles and shotguns. They detach quickly like standard QD swivels, but the Tri-Lock system offers additional security from unwanted opening that no one else can offer.<br></p><p> </p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>Flawless fit and silent operation</strong></li><li><strong>Detach quickly</strong></li><li><strong>Three-lock system for optimum security against accidental opening</strong></li><li><strong>Fits 1 inch slings</strong></li></ul>

&lt;p&gt;The QD Super Swivels with Tri-Lock from Uncle Mike's are the super strong swivels you expect from Uncle Mike's with the extra security against accidental opening. The QD Super Swivels offer flawless fit and silent operation that make them ideal for hunting rifles and shotguns. They detach quickly like standard QD swivels, but the Tri-Lock system offers additional security from unwanted opening that no one else can offer. &lt;/p&gt;&lt;p&gt;&lt;/p&gt;&lt;h2&gt;&lt;span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;&gt;FEATURES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Flawless fit and silent operation&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Detach quickly&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Three-lock system for optimum security against accidental opening&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Fits 1.25&quot; wide slings&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

<p>The durability reliability and excellent build quality of Uncle Mike's Quick Disconnect (QD) sling swivels will provide years of service you can count on. </p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong><li><strong>Forend adapter with stud installs in the barrel band of gun</strong></li><li><strong>Fits: Ruger (10/22, 44 Magnum, and number 3 carbines)</strong></li><li><strong>1-forend adapter with stud</strong></li><li><strong>1-wood screw (1/2&quot;) for optional forend stud mounting</strong></li><li><strong>1-wood screw rear stud</strong></li><li><strong> 2-Quick Disconnect&amp;nbsp; swivels for 1&quot; slings</strong></li></strong></li></ul>

<p>Auto/ Single shot Ruger carbine sling swivels. Fore end adapter fits barrel band of 10/22 .44 Mag. and No. 3 carbines. 1/2 wood screw allows fore-end stock mounting.&amp;nbsp;With these swivels you get the great quality you have come to expect from Uncle Mike's on your Ruger rifle.</p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong><li><strong>Fits Ruger 10/22, .44 Mag, and No. 3 Carbines</strong></li><li><strong>Includes forend adapter</strong></li><li><strong>Includes wood screws for stock mounting</strong></li></strong></li></ul>

<p>Magnum band shotgun sling swivel made by Uncle Mike's. </p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>Fits Most single barreled 12 gauges. (.800-.850 dia.)</strong></li><li><strong>Magnum split barrel band base mounts without tools or dismantling </strong></li></ul>

<p>Magnum band sling swivel made by Uncle Mike's. </p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>Fits some 20 gauges. (.700-.750 diameter)</strong></li><li><strong>Magnum split barrel band base mounts without tools or dismantling </strong></li></ul>

<p>Remington 870 and 870 youth replacement magazine cap with swivel base 3/4 wood screw butt-stock swivel base and two Super Swivels. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Includes two super swivels </strong></li></ul>

&lt;p&gt;Magnum band swivel screws made by Uncle Mike's Set of one each standard QD 7/8 machine screw base nut and 3/4 rear wood screw base with white spacers only. &lt;/p&gt;&lt;p&gt;&lt;/p&gt;&lt;h2&gt;&lt;span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;&gt;FEATURES:&lt;/span&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Includes white spacers&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;10/32x7/8&quot;&amp;nbsp; machine screw with nut&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;3/4&quot; wood screw&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Fits most woodstocked bolt action rifles&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

<p>Magnum band swivel screws made by Uncle Mike's set of one each od 1/2 wood screw fore-end base and 3/4 rear wood screw base with white spacers only. </p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>Includes spacers</strong></li><li><strong>1/2&quot; wood screw fore end base</strong></li><li><strong>3/4&quot; wood screw rear base</strong></li><li><strong>Fits most wood stocked bolt action rifles</strong></li><li><strong>Accepts all Uncle Mike's Super Swivels</strong></li><li><strong>Instructions included</strong></li></ul>

<p>Tactical shotgun sling with sewn in swivels made by Uncle Mike's. One snap converts the sling from shooting to carrying mode. 48 length adjusts with snap open or closed. Includes sewn-in 1 1/4&quot; Uncle Mike's swivels. </p><p></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>FEATURES:</span></h2><ul><li><strong>1 1/4&quot; nylon web</strong></li><li><strong>Includes sewn in 1 1/4&quot; Uncle Mike's QD swivels</strong></li><li><strong>Flip open snap converts from carry to shoot</strong></li></ul>

<p>This Pistol Rug features heavy weave ballistic nylon exterior with dense foam padding and heavy black cotton lining. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Barrel Pocket Protector Envelope</strong></li><li><strong>Lockable</strong></li><li><strong>Nylon Coil Zipper </strong></li></ul>

<p>You'll be amazed at the detailing and workmanship of this bag especially when you see its low price tag. Durable weather-resistant canvas with snag-free zipper and leatherette accents. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Snag-Free Poly-Padded Lining</strong></li><li><strong>Snag-Free Zipper</strong></li><li><strong>Weather-Resistant Canvas </strong></li></ul>

<p>They pioneered the use of nylon in holsters more than 20 years ago and truly revolutionized the industry. Through countless days in the field - with hunters law enforcement agencies and the military - this incredibly tough tightly woven material has proven itself up to the test. They mold to the shape of your gun for tight sure carry and return to original shape when empty. Comfortable - Lightweight with a medium-high ride design and fit holster belts up to 2 1/4 wide and standard trouser belts. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Waterproof – Keeps moisture off your sidearm and bolsters durability</strong></li><li><strong>Right hand</strong></li><li><strong>Size 0</strong></li><li><strong>Fits 2 - 3 Barrel sm/med dbl. action revolvers except 2 5-shot </strong></li></ul>

<p>They pioneered the use of nylon in holsters more than 20 years ago and truly revolutionized the industry. Through countless days in the field - with hunters law enforcement agencies and the military - this incredibly tough tightly woven material has proven itself up to the test. They mold to the shape of your gun for tight sure carry and return to original shape when empty. Comfortable - Lightweight with a medium-high ride design and fit holster belts up to 2 1/4 wide and standard trouser belts. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Waterproof – Keeps moisture off your sidearm and bolsters durability</strong></li><li><strong>Right hand</strong></li><li><strong>Size 1</strong></li><li><strong>Fits 3 - 4 Barrel medium autos </strong></li></ul>

<p>They pioneered the use of nylon in holsters more than 20 years ago and truly revolutionized the industry. Through countless days in the field - with hunters law enforcement agencies and the military - this incredibly tough tightly woven material has proven itself up to the test. They mold to the shape of your gun for tight sure carry and return to original shape when empty. Comfortable - Lightweight with a medium-high ride design and fit holster belts up to 2 1/4 wide and standard trouser belts. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Waterproof – Keeps moisture off your sidearm and bolsters durability</strong></li><li><strong>Right hand</strong></li><li><strong>Size 2</strong></li><li><strong>Fits 3 - 4 Barrel medium and large double action revolvers </strong></li></ul>

<p>They pioneered the use of nylon in holsters more than 20 years ago and truly revolutionized the industry. Through countless days in the field - with hunters law enforcement agencies and the military - this incredibly tough tightly woven material has proven itself up to the test. They mold to the shape of your gun for tight sure carry and return to original shape when empty. Comfortable - Lightweight with a medium-high ride design and fit holster belts up to 2 1/4 wide and standard trouser belts. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Waterproof – Keeps moisture off your sidearm and bolsters durability</strong></li><li><strong>Right hand</strong></li><li><strong>Size 5</strong></li><li><strong>Fits 4½ - 5 Barrel large autos, Open end </strong></li></ul>

<p>They pioneered the use of nylon in holsters more than 20 years ago and truly revolutionized the industry. Through countless days in the field - with hunters law enforcement agencies and the military - this incredibly tough tightly woven material has proven itself up to the test. They mold to the shape of your gun for tight sure carry and return to original shape when empty. Comfortable - Lightweight with a medium-high ride design and fit holster belts up to 2 1/4 wide and standard trouser belts. </p><p><h2><span style=background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;>FEATURES:</span></h2><ul><li><strong>Waterproof – Keeps moisture off your sidearm and bolsters durability</strong></li><li><strong>Right hand</strong></li><li><strong>Size 6</strong></li><li><strong>Fits 5½ - 6 Barrel .22 Autos and airguns </strong></li></ul>