Product Name Cleanup — Phase 4

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p><h2><b style="background-color: rgb(255, 255, 0);">FEATURES:</b></h2><ul><li><strong>Fits Lee Precision Full-length Size Die .218 Bee .22 Hornet .221 Fireball.</strong></li><li><strong>Expands case mouth to aid bullet seating.</strong></li><li><strong>Made from steel.</strong></li></ul>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>The <strong>Lee Precision .38 Special, .357 Magnum Powder Through Expanding Die</strong> has an expanded and flared case neck with a hollow plug. This allows simultaneous charging with Auto-Disk Powder Measure or Dipper. The Powder Funnel adapter can be replaced with a<strong> <a href=&quot;/lee-precision-auto-disk-powder-measure.html&quot;>Lee Auto-Disk Powder Measure</a> </strong>for fully automatic powder charging while the case mouth is being expanded. Shell holder sold separately. Every Lee 3-Die Set includes a Powder Through Expanding Die at no extra cost.</p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>INCLUDES:</span></h2><ul> <li><strong>Powder through Expanding Die (shown in image at right)<img alt=&quot;Lee Precision Powder through die cutaway&quot; src=&quot;/image/catalog/userfiles/powderthrough.jpg&quot; style=&quot;width: 189px; height: 300px; float: right; margin-left: 10px; margin-right: 10px;&quot; /></strong></li> <li><strong>Storage Case</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Features:</span></h2><p><strong>The Powder Funnel adapter can be replaced with a <a href=&quot;/lee-precision-auto-disk-powder-measure.html&quot;>Lee Auto-Disk Powder Measure</a> for fully automatic powder charging while the case mouth is being expanded. </strong></p><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Notes:</span></h2><p>Shell holder sold separately</p><p> </p>

&lt;p&gt; Lee Double Cavity Mold produces a gas checked .452 diameter 230 grain round with 2 ogive radius bullet suitable for cartridges like .45&lt;span style=&quot;line-height: 1.6em;&quot;&gt; etc.&lt;/span&gt;&lt;br&gt;&lt;/p&gt;&lt;p&gt;&lt;span style=&quot;line-height: 1.6em;&quot;&gt; Gas checks not included. &lt;/span&gt;&lt;/p&gt;&lt;p&gt;All Lee Precision Mold Blocks are made from aluminum because of the exceptional molding qualities. Lee molds feature trochoidal venting on the mold face and sprue plate mating surface.This unique venting allows consisstent and effortless fill out. The mold cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee molds can be used as cast without sizing&lt;/p&gt;&lt;p&gt;&lt;iframe width=&quot;400&quot; height=&quot;225&quot; frameborder=&quot;0&quot; style=&quot;line-height: 1.6em;&quot; src=&quot;https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0&quot; allowfullscreen=&quot;&quot;&gt;&lt;/iframe&gt;&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p><strong>Lee Precision PaceSetter 3-Die 7.5x54 French Mas Set</strong> includes the exclusive <strong>Lee Factory Crimp die.</strong> It crimps the bullet in place more firmly than any other tool which prevent buckling of the case and makes for more accurate shooting. The die set also includes a <strong>Bullet Seating Die</strong> that works with almost any point style bullet. A simple finger adjustment is all that is needed to adjust the seating depth. If you are reloading for more than one firearm or reloading cases that were fired in other firearms the <strong>Full Length Sizer Die</strong> is a must. These dies are your best buy. They also include a shell holder, powder dipper, load data and are packed in a durable storage box. </p>

<p>This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.</p>FEATURES:<ul><li><strong>Fits Lee Precision Full-length Size Dies 30 caliber medium.</strong></li><li><strong>Expands case mouth to aid bullet seating.</strong></li><li><strong>Made from steel.</strong></li></ul>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p><strong>Lee Precision High Speed Melter, 110 Volt </strong>with the <strong>Infinite Heat Control, </strong>is mounted away from the high heat of the pot. This eliminates failures associated with thermostatically controlled units. Thermal feed back to the Infinite Control permits heater to put out full power until metal has melted. Easily handles 4-cavity molds. Takes less than 15 minutes to melt 4 pounds of metal. 500 watts AC only. </p><p><br></p><h2><em> <strong>LEE MAKES BULLET CASTING EASIER</strong></em></h2><h2><strong>Features:</strong></h2><ul><li><strong>Capacity:</strong> 10 Pounds</strong></li><li><strong>Voltage:</strong> 110 Volt</strong></li><li><strong>Pot Diameter:</strong> 4&quot;</strong></li><li><strong>Wattage:</strong> 500</strong></li><li><strong>Melt Time:</strong> Approx. 20 minutes</strong></li><li><strong>Function: </strong>Melting and blending lead alloys for bullet casting</strong></li><li><strong>Infinite Heat Control</strong> eliminates thermal feed back</strong></li><li><strong>Adjustable Flow Valve</strong></li><li><strong>Capable of 900 degress Fahrenheit</strong></li></ul><h2><strong>Lead Information:</strong></h2><ul><li><strong>The following lead information is from the <strong><a href=&quot;/lee-precision-modern-reloading-2nd-edition.html&quot;>Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 &amp; 120.</strong></li><li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li><li><strong>Black Powder guns require Pure Lead.</strong></li><li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable &amp; harder.</strong></li><li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li><li><strong>Use Wheel Weights for very light rifle loads. </strong></li><li><strong>High Pressure Rifle loads use Linotype.</strong></li><li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img alt=&quot;WARNING&quot; src=&quot;/image/catalog/userfiles/YellowWarningTransparent(1).png&quot; style=&quot;float:left; height:63px; margin-left:8px; margin-right:8px; width:71px&quot;><strong>WARNING:</strong> Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm and cancer. See instructions on Reducing Exposure supplied with product.</strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

Part EM1949 - 1 required for Lee Precision products

Part EM1956 - 1 required for Lee Precision products

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;&lt;strong&gt;Lee Precision Replacement 110 volt&lt;/strong&gt; Heater Coil for the Precision Melter, Production Pot and Production Pot IV.&lt;/p&gt;&lt;!-- AKA_MPN --&gt;&lt;p&gt;This product is formerly known as &lt;a href=&quot;lee-precision-heater-coil-500w-110v.html&quot;&gt;90095&lt;/a&gt;&lt;/p&gt;

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;The &lt;strong&gt;Lee Precision Shell Holder #16&lt;/strong&gt;fits &lt;strong&gt;.500 S&amp;W Magnum 12.7x41mmSR 7.62x54mmR 7.62x54 Russian 8x56mmR 8 x 56 R M30S &lt;/strong&gt;and&lt;strong&gt; 8x56R Hungarian &lt;/strong&gt;cases. It is made from hardened steel which has been machined to close tolerance for use with the Lee New Auto Prime Lee Ergo Prime Lee Auto Bench Prime and the Frankford Arsenal Hand Priming Tool.&lt;/p&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Made from hardened steel.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;&lt;strong&gt;FITS:&lt;/strong&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;.500 S&amp;W Magnum 12.7x41mmSR&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;7.62x54mmR 7.62x54 Russian&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;8x56mmR 8 x 56 R M30S 8x56R Hungarian&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;For hand priming with the Lee Precision and Frankford Arsenal hand priming tools.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Lee Precision Ergo Prime&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Lee Precision New Auto-Prime&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Lee Precision Auto Bench Prime&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Frankford Arsenal Perfect Seat Hand Primer&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Will not work with reloading presses.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

<p>Part SH2672 - 1 required for Lee Precision products (D)</p>

<p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .309 diameter, 200 grain round nose bullets suitable for .<strong>30 Caliber Rifle.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. </p><p>Handles included. Gas checks not included. </p><p>All Lee Precision Mold Blocks are made from aluminum because of the exceptional molding qualities. Lee molds feature trochoidal venting on the mold face and sprue plate mating surface.This unique venting allows consisstent and effortless fill out. The mold cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee molds can be used as cast without sizing</p><p><iframe width="400" height="225" frameborder="0" allowfullscreen="" src="https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0"></iframe></p><p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .309 diameter, 200 grain round nose bullets suitable for .<strong>30 Caliber Rifle.</strong> This mold, like all Lee Precision molds, is made from aluminum and so is completely rust resistant, lighter, and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.</p><p><strong>Handles and sprue plate are included</strong>. The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><div style="clear: both;"> </div><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Hardwood handles</strong></li> <li><strong>Hard anodized sprue plate</strong></li> <li><strong>Two Aluminum mold block halves</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">FEATURES:</span></span></h2><ul> <li><strong>Produces a bullet that fits 30 Caliber Rifle.</strong></li> <li><strong>Bullet diameter: .309 inches</strong></li> <li><strong>Bullet weight: 200 grains (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: N/A</strong></li> <li><strong>Distance from nose to first lube groove: N/A</strong></li> <li><strong>Bullet shape: Round nose</strong></li> <li><strong>Ballistic Coefficient: N/A</strong></li> <li><strong>2 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are CNC machined from aluminum for exacting precision</strong>.</strong></li> <li><strong>A tangential cutoff helps reduce the nip at cutoff.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged & bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href="/lee-precision-melter-110-v.html"> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple & your best bullets are poured with the <strong><a href="/lee-precision-lead-ladle.html">Lee Ladle</a></strong>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a href="http://www.hodgdon.com/" target="_blank">HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 & 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img alt="" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;" /><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses </a></strong>when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p><strong>Lee Precision Double Cavity R.E.A.L. (Rifling Engraved At Loading) Bullet </strong><strong style="font-size: 13px; line-height: 1.6em;">Mold</strong><span style="font-size: 13px; line-height: 1.6em;"> produces two .</span><strong style="font-size: 13px; line-height: 1.6em;">45 Caliber, </strong><span style="font-size: 13px; line-height: 1.6em;">200 grain bullets for <strong>Muzzleloaders.</strong> Because of the unique cleaning action, this solid bullet loads easily even after many firings. When inserted into the muzzle, tiny scraping edges are swagged forward on each band. These fitting scrapers remove the fouling from the previous shot. A perfect bullet for hunters with heavy loads. The bevel base of the R.E.A.L. bullet contributes to greater accuracy. As the bullet exits the bore,the gas escapes equally around the perimeter of the base. Will not tumble.</span><span style="font-size: 13px; line-height: 1.6em;"> <strong>Includes Handles and Sprue Plate.</strong></span><br></p><h2><em><strong> USE ONLY PURE LEAD</strong></em></h2><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Hardwood handles</strong></li> <li><strong>Hard anodized sprue plate</strong></li> <li><strong>Two Aluminum mold block halves</strong></li> <li><strong>Instructions/Load Data</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged & bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href="/lee-precision-melter-110-v.html"> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple & your best bullets are poured with the<strong> <a href="/lee-precision-lead-ladle.html">Lee Ladle</a>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a href="http://www.hodgdon.com/" target="_blank">HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 & 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img alt="" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;"><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated, with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href="/caldwell-pro-range-glasses-clear-1226872936.html">safety glasses</a></strong> when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li> <li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li> <li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>This <strong>Lee Precision Double Cavity Bullet Mold</strong> produces .311 diameter 100 grain, 2 Ogive Radius bullets, suitable for <strong>32/20, .32 S&W Long, .32 Colt New Police. </strong>This mold, like all Lee Precision molds, is made from rust resistant aluminum and heats up and cools down faster than other brands made from iron or steel. As a result, Lee molds are easier to use, cause less operator fatigue during casting and can produce more consistent bullets than other brands made from iron or steel. Lee's mold blocks are CNC machined to provide unmatched precision.</p><p><strong>Handles and sprue plate are included.</strong> The bullet weight specified is based on using Lee's suggested alloy, your results may vary depending on the actual alloy used.</p><h2> <br></h2><p><iframe width="400" height="225" frameborder="0" allowfullscreen="" src="https://www.youtube-nocookie.com/embed/W02KqDw35Z0?rel=0"></iframe></p><p><br></p><h2><span style="font-size: small"><font size="2"> </font></span><em style="line-height: 1.2em;"><span style="line-height: 1.2em;"> PURE LEAD SHOULD BE USED </span></em></h2><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">INCLUDES:</span></h2><ul> <li><strong>Hard anodized sprue plate & handle</strong></li> <li><strong>Two Aluminum mold block halves</strong></li> <li><strong>Instructions</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><span style="line-height: 1.2em;">FEATURES:</span></span></h2><ul> <li><strong>Produces a bullet that fits .32/20, .32 S&W Long, .32 Colt NP </strong></li> <li><strong>Bullet diameter: .311 inches</strong></li> <li><strong>Bullet weight: 100 grain (with Lee's suggested alloy)</strong></li> <li><strong>Bullet overall length: .578 inches</strong></li> <li><strong>Distance from nose to first lube groove: .298 inches</strong></li> <li><strong>Bullet shape: round nose</strong></li> <li><strong>Ballistic Coefficient: .174 </strong></li> <li><strong>2 bullets are produced with each casting.</strong></li> <li><strong>Mold block halves are CNC machined from aluminum for exacting precision</strong>.</strong></li> <li><strong>A tangential cut off helps reduce the nip at cut off.</strong></li></ul><h2><span style="background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">NOTES:</span></h2><ul> <li><strong>Bullet mold will be damaged & bullet will be poor quality unless lubricated. FS Reloading recommends <strong><a href="/frankford-arsenal-cleancast-lead-flux-1-lb-1048900006.html">Frankford Arsenal Cleancast Lead Fluxing Compound</a> or <a href="/frankford-arsenal-drop-out-6-oz-aerosol-110769404.html">Frankford Arsenal Drop out Bullet Mold Release and Lube Aerosol</a>.</strong></li> <li><strong>The<a href="/lee-precision-melter-110-v.html"> <strong>Lee Precision Melter 110 V </strong></a>is the best method of melting your metal. Heat control is simple & your best bullets are poured with the <strong><a href="/lee-precision-lead-ladle.html">Lee Ladle</a>.</strong></li> <li><strong>Before handling lead or case lube, FS Reloading recommends <strong><a href="/tipton-vinyl-gloves-large-pkg-of-6pr-1275382381.html">Tipton Vinyl Gloves</a></strong></li> <li><strong>For Load Data information try <strong><a href="http://www.hodgdon.com/" target="_blank">HODGDON Powder Co.</a></strong></li></ul><h2><strong>Lead Information:</strong></h2><ul> <li><strong>The following lead information is from the <strong><a href="/lee-precision-modern-reloading-2nd-edition.html">Lee Precision Modern Reloading 2nd Edition</a></strong> Book, Pages 119 & 120.</strong></li> <li><strong>For best results, bullet strength must be matched to breech pressure.</strong></li> <li><strong>Black Powder guns require Pure Lead.</strong></li> <li><strong>Target handgun loads should use Lead with 1% Tin. Tin makes bullet alloy more castable & harder.</strong></li> <li><strong>Lead with some wheel weights used for high pressure handguns.</strong></li> <li><strong>Use Wheel Weights for very light rifle loads. </strong></li> <li><strong>High Pressure Rifle loads use Linotype.</strong></li> <li><strong>Beware of Zinc! One part Zinc in 10,000 parts of Lead Alloy will ruin it's castability.</strong></li></ul><p><strong><img alt="" src="/image/catalog/userfiles/YellowWarningTransparent(1).png" style="width: 71px; height: 63px; float: left; margin-left: 0px; margin-right: 8px;"><span style="color: rgb(255, 255, 255);"><span style="background-color: rgb(255, 0, 0);"> WARNING: </span></span> Melting lead and casting lead objects will expose you and others in the area to lead which is known to cause birth defects, other reproductive harm and cancer. </strong></p><h2><strong> USE STRONG VENTILATION</strong></h2><p>Lead contamination in the air, dust and on your skin is invisible. Keep Children and pregnant women away during use and until clean-up is complete. Risk can be reduced, BUT NOT eliminated , with strong ventilation. Washing hands immediately after use of these products before eating or smoking. Careful cleaning of surfaces and floors with disposable wipes, after lead dust has settled. Use lead-specific cleaner with EDTA or high phosphate detergent (such as dishwasher detergent). Bag wipes for disposal.</p><h2><span style="line-height: 1.2em;"> <strong> </strong></span><strong style="line-height: 1.2em;"><em style="line-height: 1.2em;">IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;"><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul> <li><strong>DO NOT USE more powder than recommended</strong></li> <li><strong>DO NOT USE a heavier bullet than recommended</strong></li> <li><strong>DO NOT SEAT the bullet deeper than normal</strong></li> <li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li> <li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li> <li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style="background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;">WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul> <li><strong>Always wear <strong><a href="/caldwell-pro-range-glasses-with-yellow-lens-621193086.html">safety glasses </a></strong>when reloading and shooting.</strong></li> <li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li> <li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li> <li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li> <li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</stro

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

&lt;p&gt;The&amp;nbsp;&lt;strong&gt;Lee Precision .35 Remington Quick Trim Rifle Die&lt;/strong&gt;&amp;nbsp;is used in conjunction with the&amp;nbsp;&lt;strong&gt;Lee Precision Deluxe Quick Trim Case Trimmer&lt;/strong&gt;&amp;nbsp;or the&amp;nbsp;&lt;strong&gt;Lee Precision Value Trim Case Trimmer&lt;/strong&gt;.&lt;/p&gt;&lt;p&gt;When installed in a press like the&amp;nbsp;&lt;strong&gt;Lee Precision Breech Lock Challenger press&lt;/strong&gt;, it holds the trimmer in precise alignment with the case so no calipers, measurement or trial and error adjustment is required to precisely trim your cases.&lt;/p&gt;&lt;h2 style=&quot;font-family: &amp;quot;Open Sans&amp;quot;, sans-serif; color: rgb(0, 0, 0);&quot;&gt;&lt;strong&gt;&lt;b style=&quot;background-color: rgb(255, 255, 0); padding: 3px 7px; text-transform: uppercase;&quot;&gt;FEATURES:&lt;/b&gt;&lt;/strong&gt;&lt;/h2&gt;&lt;ul&gt;&lt;li&gt;&lt;strong&gt;Holds trimmer in precise alignment with the case.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;No measurement or trial and error required.&lt;/strong&gt;&lt;/li&gt;&lt;li&gt;&lt;strong&gt;Quick and easy.&lt;/strong&gt;&lt;/li&gt;&lt;/ul&gt;

<p>The <strong>Lee Precision .280 Roberts Ackley Improved 40-Degree Shoulder PaceSetter 2-Die Set.</strong> Very Limited Production. Includes a Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper and Instructions.</p><p>The <strong>Lee Precision .280 Roberts Ackley Improved 40-Degree Shoulder PaceSetter 2-Die Set.</strong> Very Limited Production. Bullet Diameter .284&quot;. Maximum Overall Length 3.330&quot;. Includes a <strong>Full Length Sizer</strong> that allows you to restore any case to factory original dimensions. So you can fire form in your gun. Also includes a <strong>Bullet Seating Die</strong>, that works with nearly any point style bullet and has a simple finger adjustable seating depth. Tapered on end for use with automatic bullet feeders. </p><p><span style=&quot;line-height: 1.6em;&quot;>Lee Precision guarantees no other brand of full length sizing dies will load ammunition with less bullet runout than Lee Rifle Dies.</span></p><div style=&quot;clear: both;&quot;> </div><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>INCLUDES:</span></h2><ul><li><strong>Full Length Sizing Die</strong></li><li><strong>Bullet Seating Die</strong></li><li><strong>Universal Shell Holder</strong></li><li><strong>Powder Dipper</strong></li><li><strong>Instructions/Load Data</strong></li></ul><h2><span style=&quot;background-color:#FFFF00;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>Notes:</strong></span></h2><ul><li><strong>This die has a .014&quot; longer head space than the SAAMI 280 Ackley Improved specification. Cases sized in a Lee Die may not fit in a rifle chambered for the SAAMI 280 Ackley Improved</strong></li><li><strong>Speer advises that Speer bullets should not be used with certain Lee Dies. All other brands work great!</strong></li><li><strong>If for any reason you do not use the<a href=&quot;/lee-precision-resizing-lubricant.html&quot;> Lee Resizing Lubricant,</a> be very careful not to contaminate the powder or primers. Other brands are oil base and have serious, detrimental effects on powder &amp; primers. Because of the stickiness, they also attract grit that can damage the die.</strong></li></ul><h2><span style=&quot;background-color:#FFB84D;color:#000000;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>Caution:</span></h2><ul><li><strong>If your using a Steel Sizer, be sure to lubricate your cases. Without lubrication, your die will be damaged and the case may become stuck in the die</strong></li><li><strong>Seating bullets excessively deep will reduce the case capacity and increase the pressure. It is Extremely Important that full wadcutter bullets be used with light loads ONLY. You can select these by their reduced velocity.</strong></li></ul><h2><span style=&quot;line-height: 1.2em;&quot;> <strong> </strong></span><strong style=&quot;line-height: 1.2em;&quot;><em style=&quot;line-height: 1.2em;&quot;>IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS</em></strong></h2><p><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;><strong>FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:</strong></span></p><ul><li><strong>DO NOT USE more powder than recommended</strong></li><li><strong>DO NOT USE a heavier bullet than recommended</strong></li><li><strong>DO NOT SEAT the bullet deeper than normal</strong></li><li><strong>DO NOT USE magnum primers unless using a slow burning ball powder</strong></li><li><strong>Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures</strong></li><li><strong>High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures</strong></li></ul><h2><span style=&quot;background-color:#ff0000;color:#ffffff;font-weight:bold;padding-bottom:3px;padding-left:7px;padding-right:7px;padding-top:3px;text-transform:uppercase;&quot;>WARNING:</span></h2><p><strong>Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.</strong></p><ul><li><strong>Always wear <a href=&quot;/caldwell-pro-range-glasses-with-yellow-lens-621193086.html&quot;>safety glasses</a> when reloading and shooting.</strong></li><li><strong>Ammunition loaded with these tools should be used in modern guns, in good condition.</strong></li><li><strong>Children should not be permitted to reload ammunition without strict parental supervision.</strong></li><li><strong>Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.</strong></li><li><strong>We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.</strong></li></ul><p> </p>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

<p>Lee #4A Quick change shell plate for the Load-Master Press. Fits .32 Smith & Wesson Long .32 H&R Magnum .327 Federal Magnum and similar cases.</p>

<p>Lee #14L Quick change shell plate for the Load-Master Press. Fits .44-40 Winchester, .38-40 Winchester, 45 Colt, .460 Smith & Wesson and similar cases.</p>

<p> Lee Precision Folding primer tray (2-pack) for use with the Lee Pro 1000, Lee Load-Master, Lee Safety Prime, New Lee Auto-Prime, Lee Ergo-Prime and Lee Bench Prime.</p><h2><b style=&quot;background-color: rgb(255, 255, 0);&quot;>FEATURES:</strong></h2><ul><li><strong><b style=&quot;&quot;><strong style=&quot;&quot;>Includes two folding primer trays.</strong></li><li><strong><b style=&quot;&quot;><strong>Works with all Lee Presses that use folding primer trays.</strong></li><li><strong><b style=&quot;&quot;><strong style=&quot;&quot;>Fits Lee Precision priming tools: Safety Prime, Auto-Primer, Ergo-Prime, Bench Prime.</strong></li></ul><p><b style=&quot;background-color: rgb(255, 255, 0);&quot;> </strong></p><div><b style=&quot;background-color: rgb(255, 255, 0);&quot;> </strong></div><div><b style=&quot;background-color: rgb(255, 255, 0);&quot;> </strong></div><div><b style=&quot;background-color: rgb(255, 255, 0);&quot;> </strong></div>

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.

This is a repair part for Lee Precision reloading tools. The product photos show a typical repair part of this type. There may be minor differences due to size variations and/or product version updates from Lee Precision.